Bedienungsanleitung BenQ mp 730 (Seite 15 von 68) (Englisch)

214481

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Positioning your projector 15

Obtaining a preferred projected image size

The distance from the projector lens to the screen, the zoom setting, and the video format

each factors in the projected image size.

The projector should always be placed horizontally level (like flat on a table), and positioned

directly perpendicular (90° right-angle square) to the horizontal center of the screen. This

prevents image distortion caused by angled projections (or projecting onto angled surfaces).

The modern digital projector does not project directly forward (like older style reel-to-reel

film projectors did). Instead, digital projectors are designed to project at a slightly upward

angle above the horizontal plane of the projector. This is so that they can be readily placed

on a table and will project forward and upwards onto a screen positioned so that the bottom

edge of the screen is above the level of the table (and everyone in the room can see the

screen).

If the projector is mounted on a ceiling, it must be mounted upside-down so that it projects

at a slightly downward angle.

You can see from the diagrams on pages 17-20, that this type of projection causes the

bottom edge of the projected image to be vertically offset from the horizontal plane of the

projector. When ceiling mounted, this refers to the top edge of the projected image.

If the projector is positioned further away from the screen, the projected image size

increases, and the vertical offset also increases proportionately.

When determining the position of the screen and projector, you will need to account for

both the projected image size and the vertical offset dimension, which are directly

proportional to the projection distance.

BenQ has provided tables of 16:9-aspect-ratio and 4:3-aspect-ratio screen sizes to assist you

in determining the ideal location for your projector. There are two dimensions to consider,

the perpendicular horizontal distance from the center of the screen (projection distance),

and the vertical offset height of the projector from the horizontal edge of the screen (offset).

How to determine the position of the projector for a given

screen size

1. Determine the aspect ratio of your screen, 16:9 or 4:3? If you have a 16:9 screen, refer

to page 17 or 18. If you have a 4:3 screen, refer to page 19 or 20 depending on the

projected picture aspect ratio you’ve got.

2. Select your screen size.

3. Refer to the table and find the closest match to your screen size in the left columns

labelled "Screen Dimensions". Using this value, look across this row to the right to find

the corresponding average distance from screen value in the column labelled

"Average". This is the projection distance.

4. On that same row, look across to the right column and make note of the "Vertical

Offset" value. This will determine the final vertical offset placement of the projector in

relation to the edge of the screen.

5. The recommended position for the projector is aligned perpendicular to the

horizontal center of the screen, at the distance from the screen determined in step 3

above, and offset by the value determined in step 4 above.

For example, if you are using an 120-inch, 4:3-aspect-ratio screen and the projected picture

is 16:10, please refer to Table B2

on page 20. The average projection distance is 4180 mm and

with a vertical offset of 61 mm.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BenQ mp 730 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BenQ mp 730

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info