Bedienungsanleitung BenQ mp512 (Seite 14 von 59) (Englisch)

214907

Zoom out

Zoom in

Vorherige Seite

1/59

Nächste Seite

Positioning your projector14

Obtaining a preferred projected image size

The distance from the projector lens to the screen, the zoom setting (if available), and the

video format each factors in the projected image size.

4:3 is the native aspect ratio of this projector. To be able to project a complete 16:9

(widescreen) aspect ratio image, the projector can resize and scale a widescreen image to the

projector's native aspect width. This will result in a proportionally smaller height equivalent

to 75% of the projector's native aspect height.

Thus, a 16:9 aspect image will not utilize 25% of the height of a 4:3 aspect image displayed

by this projector. This will be seen as darkened (unlit) bars along the top and bottom

(vertical 12.5% height respectively) of the 4:3 projection display area whenever displaying a

scaled 16:9 aspect image in the vertical center of the 4:3 projection display area.

The projector should always be placed horizontally level (like flat on a table), and positioned

directly perpendicular (90° right-angle square) to the horizontal center of the screen. This

prevents image distortion caused by angled projections (or projecting onto angled surfaces).

The modern digital projector does not project directly forward (like older style reel-to-reel

film projectors did). Instead, digital projectors are designed to project at a slightly upward

angle above the horizontal plane of the projector. This is so that they can be readily placed

on a table and will project forward and upwards onto a screen positioned so that the bottom

edge of the screen is above the level of the table (and everyone in the room can see the

screen).

If the projector is mounted on a ceiling, it must be mounted upside-down so that it projects

at a slightly downward angle.

You can see from the diagram on page 16, that this type of projection causes the bottom edge

of the projected image to be vertically offset from the horizontal plane of the projector.

When ceiling mounted, this refers to the top edge of the projected image.

If the projector is positioned further away from the screen, the projected image size

increases, and the vertical offset also increases proportionately.

When determining the position of the screen and projector, you will need to account for

both the projected image size and the vertical offset dimension, which are directly

proportional to the projection distance.

BenQ has provided a table of 4:3-aspect-ratio screen sizes to assist you in determining the

ideal location for your projector. Refer to "MP513/MP522 projection dimensions" on page

16 or "MP512 projection dimensions" on page 17 depending on the projector you are using.

There are two dimensions to consider, the perpendicular horizontal distance from the center

of the screen (projection distance), and the vertical offset height of the projector from the

horizontal edge of the screen (offset).

4:3 aspect image in a 4:3

aspect display area

16:9 aspect image scaled to a 4:3 aspect

display area

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BenQ mp512 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BenQ mp512

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info