Bedienungsanleitung BenQ MX525A (Seite 32 von 60) (Englisch)

648875

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Operation32

Hiding the image

In order to draw the audience's full attention to the presenter, you can use ECO BLANK

on the projector or remote control to hide the screen image. When this function is

activated with an audio input connected, the audio can still be heard.

You can set the blank time in the

SYSTEM SETUP: Basic > Operation Settings >

Blank Timer

menu to let the projector return the image automatically after a period of

time when there is no action taken on the blank screen.

If the preset time spans are not suitable for your presentation, select Disable.

No matter

Blank Timer is activated or not, you can press most of the keys on the

projector or remote control to restore the picture.

Do not block the projection lens from projecting as this could cause the blocking object to become heated and

deformed or even cause a fire.

Locking control keys

With the control keys on the projector locked, you can prevent your projector settings

from being changed accidentally (by children, for example). When the Panel Key Lock is

on, no control keys on the projector will operate except POWER.

1. Go to the SYSTEM SETUP: Basic > Panel Key Lock menu, and select On by

pressing / on the projector or remote control. A confirmation message

appears.

2. Highlight Ye s and press MODE/ENTER to confirm.

To release panel key lock, use the remote control to enter the

SYSTEM SETUP:

Basic > Panel Key Lock menu and press / to select Off.

• Keys on the remote control are still active when panel key lock is enabled.

• If you turn off the projector without disabling panel key lock, the projector will still be in locked status the

next time it is turned on.

Operating in a high altitude environment

We recommend you use the High Altitude Mode when your environment is between

1500 m –3000 m above sea level, and ambient temperature is between 0°C–30°C.

Do not use the High Altitude Mode if your altitude is between 0 m and 1500 m and ambient temperature is

between 0°C and 35°C. The projector will be over cooled, if you turn the mode on under such a condition.

To activate the High Altitude Mode:

1. Press MENU/EXIT and then press / until the SYSTEM SETUP: Advanced

menu is highlighted.

2. Press to highlight High Altitude Mode and press / select On. A

confirmation message appears.

3. Highlight Ye s and press MODE/ENTER.

Operation under "High Altitude Mode" may cause a higher decibel operating noise level

because of increased fan speed necessary to improve overall system cooling and

performance.

If you use this projector under other extreme conditions excluding the above, it may

display auto shut-down symptoms, which is designed to protect your projector from over-

heating. In cases like this, you should switch to High Altitude mode to solve these

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BenQ MX525A Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BenQ MX525A

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info