648936
7
Zoom out
Zoom in
Vorherige Seite
1/76
Nächste Seite
Introduction 7
Introduction
Projector features
The projector offers the following features
SmartEco™ starts your dynamic power saving
The SmartEco™ technology offers a new way of operating the projector lamp system
and saves lamp power up to 70% depending on the content brightness level.
Longer lamp life with SmartEco™ technology
The SmartEco™ technology lowers the power consumption and increases the lamp life
when SmartEco mode is selected.
HDMI/MHL compatible
You can project the content from your smart devices via HDMI-1/MHL connection.
ECO BLANK saves 70% of lamp power
By pressing the ECO BLANK button to hide the image and immediately lower 70% of
the lamp power at the same time.
USB MINI-B jack to use the page up/down commands (like Microsoft PowerPoint)
using the remote control when connected a PC.
USB TYPE A jack to support 5V/1.5A output.
Less than 0.5W in standby condition
Less than 0.5W power consumption under standby mode.
Filter Free
Filter free design to lower maintenance and operating costs.
Network Control
Integrated RJ45 connector for wired network control allowing management of
projector status from a computer using a web browser.
Crestron RoomView
®
, PJ Link and AMX supported
The projector supports Crestron eControl and RoomView, PJ Link and AMX allowing
you to control and manage equipment from a remote computer via LAN connection.
One-key auto-adjustment
Pressing AUTO on the keypad or remote control to show the best picture quality
immediately.
Built-in 10W speaker(s)
Built-in 10W speaker(s) providing mixed mono audio when an audio input is
connected.
Quick Cooling, Auto Power Off, Signal Power On, Direct Power On Quick
Cooling function speeds up the cooling process when turning off the projector. Auto
Power Off function allows the projector to turn off automatically if no input signal is
detected after a set period of time. Signal Power On function turns on your
projector automatically once detecting the signal input and Direct Power On boots
up the projector automatically when the power is connected.
Instant Restart
Selectable Instant Restart function enables you to restart the projector immediately
within 90 seconds after turning it off.
3D Function supported
Various 3D formats make the 3D function more flexible. By presenting the depth of the
images, you can wear BenQ 3D glasses to enjoy the 3D movies, videos and sporting
events in a more realistic way.
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für BenQ MX726 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von BenQ MX726

BenQ MX726 Bedienungsanleitung - Deutsch - 76 seiten

BenQ MX726 Bedienungsanleitung - Holländisch - 76 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info