Bedienungsanleitung BenQ pe 8720 (Seite 21 von 36) (Englisch)

214407

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Using the projector

English

You can change the projected image ratio (no matter what aspect the source is) by using the Aspect buttons on

the remote control or in the Display > Aspect Ratio OSD menu. Select an aspect ratio to suit the format of the

video signal and your display requirements. There are five aspect ratios available:

In the pictures below, the black portions are inactive areas and the white portions are active areas.

The Anamorphic setting stretches and resizes linearly, except that it treats the vertical and horizontal

dimensions independently. It stretches the height of the source image until it reaches the full projected height,

and stretches the width of the source image until it reaches the full projected width. This may alter the projected

aspect, depending upon the original aspect of the source image. Anamorphic is most suitable for images which

are already in a 16:9 aspect, like high definition TV, as it displays them without aspect alteration.

The 4:3 setting is most suitable for 4:3 images like standard definition TV and 4:3 aspect DVD movies, as it

displays them without aspect alteration.

The Letterbox setting resizes an image proportionately both vertically and horizontally from the width of a 4:3

aspect to the width of a 16:9 aspect and centers it onscreen. This produces an image greater in height than can

be displayed, so part of the image is lost (not displayed) along the top and bottom edges of the projection. This

is suitable for the display of movies which are presented in letterbox format (with black bars top and bottom.

The Wide setting stretches the image horizontally in a non-linear manner, that is, the edges of the image are

stretched more than the centre of the image, to prevent distortion of the central part of the image. This is

suitable for occasions where you want to stretch the width of a 4:3 aspect image to the width of a 16:9 aspect

screen. It does not alter the height. Some widescreen movies have been produced with their width squashed

down to the width of a 4:3 aspect, and are best viewed when restretched back to their original width using the

Wide setting.

The Real setting displays the image in a one-to-one pixel mapping without alteration or resize in the centre of

the projection. This is most suitable for use with PC and RGBHD source inputs.

3. Adjusting contrast ratio

The contrast ratio is the measurement of the difference between the brightest whites and the darkest blacks a

display can show. A projector with larger contrast ratio is able to show more subtle color details and allow

extraneous room light. The projector is with very high contrast ratio. You are able to tune a suitable contrast

ratio according to your room light and preference. To manually adjust the contrast ratio, press the IRIS button

on the remote control. When the button is pressed, an adjustment bar " "

displays on the screen. To lower the contrast and increase brightness, press the e button on the remote control

or in the Advanced --> Advanced - 30 step IRIS menu. To raise the contrast and decrease brightness, press the

f button on the remote control or in the Advanced --> Advanced - 30 step IRIS menu. The "L" and "H" on the

adjustment bar’s both sides represent the contrast ratio Low or High. There are 30 phases from Low to High

available for adjustments.

1. Anamorphic: Scales an image

so that it is displayed in the

center of the screen with a

16:9 aspect ratio.

2. 4:3: Scales an image so that it

is displayed in the center of

the screen with a 4:3 aspect

ratio.

3. Letterbox: Enlarges an image

with letterbox format to

display it in full-screen format

with a 16:9 aspect ratio. The

upper and lower portions of

the image are cropped.

4. Wide: A 4:3 aspect ratio image is enlarged

NON-linearly in horizontal direction to

accommodate 16:9 full-screen display. This

stretches only the right and left sides of the

image; the central part is unchanged.

5. Real: One-to-one mapping is performed on the

input signal without any scaling with the image

displayed at the center of the screen.

PE8720-en.book Page 21 Friday, May 13, 2005 5:19 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BenQ pe 8720 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BenQ pe 8720

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info