Bedienungsanleitung BenQ RP653 (Seite 7 von 86) (Englisch)

636346

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

Important safety instructions 3

• Avoid placing the display in direct sun or where direct sun or spot lighting will shine

onto the LCD panel, as the heat may damage the panel and the external casing of the

display, and the bright light will make viewing the display more difficult than necessary.

• The LCD panel consists of individual pixels to display images and is manufactured

according to the design specifications. While 99.9% of these pixels work normally,

0.01% of the pixels may remain constantly lit (in red, blue or green) or unlit. This is a

technical limitation of the LCD technology and is not a defect.

• LCD screens, like plasma (PDP) and conventional CRT (Cathode Ray Tube) screens, are

also susceptible to 'screen burn-in' or 'image retention' which can be found on the

screen as visible fixed lines and shades. To avoid such damage to the screen, avoid

displaying still images (like On-Screen Display menus, TV station logos, fixed/inactive

text or icons) for more than 30 minutes. Change the aspect ratio from time to time. Fill

the entire screen with the image and eliminate the black bars whenever possible. Avoid

displaying images in 4:3 aspect ratio over a long period of time, otherwise there may be

visible burn marks on the screen as two vertical lines.

Note: Under certain circumstances, condensation may occur on the inner side of the

cover glass, it's a natural phenomenon and will not affect the operation of the display.

This condensation will usually disappear after around 2 hours of normal operation.

• RP series does not offer image retention function, for more information, please refer to

installation guide.

• RP series does not support portrait use; portrait use may cause display damage. BenQ

warranty will not cover faulty usage.

Safety notice for remote control

• Do not put the remote control in the direct heat, humidity, and avoid fire.

• Do not drop the remote control.

• Do not expose the remote control to water or moisture. Failure to do so could result

in malfunction.

• Confirm there is no object between the remote control and the remote sensor of the

product.

• When the remote control will not be used for an extended period, remove the

batteries.

Battery safety notice

The use of the wrong type of batteries may cause chemical leaks or explosion. Please

note the following:

• Always ensure that the batteries are inserted with the positive and negative terminals in

the correct direction as shown in the battery compartment.

• Different types of batteries have different characteristics. Do not mix different types.

• Do not mix old and new batteries. Mixing old and new batteries will shorten battery life

or cause chemical leaks from the old batteries.

• When batteries fail to function, replace them immediately.

• Chemicals which leak from batteries may cause skin irritation. If any chemical matter

seeps out of the batteries, wipe it up immediately using a dry cloth, and replace the

batteries as soon as possible.

• Due to varying storage conditions, the battery life for the batteries included with your

product may be shortened. Replace them within 3 months or as soon as you can after

initial use.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BenQ RP653 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BenQ RP653

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info