Bedienungsanleitung BenQ RP703 (Seite 5 von 86) (Englisch)

636347

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

Safety warnings and precautions 1

Safety warnings and precautions

• The mains plug of the power supply cord shall remain readily operable. The AC

receptacle (mains socket outlet) shall be installed near the equipment and shall be easily

accessible. To completely disconnect this equipment from the AC mains, disconnect the

power cord plug from the AC receptacle.

• Do not place this display on an uneven, sloping or unstable surface (such as a trolley)

where it may fall and cause damage to itself or others.

• Do not place this display near water, like a spa or pool, or in a position which will allow

the splashing or spraying of water onto the display, like in front of an open window

where rain water may enter.

• Do not install this display in a confined space without proper ventilation and air

circulation, such as in a closed cabinet. Allow proper space around the display for

dissipating heat inside. Do not block any openings and vents on the display. Overheating

may result in hazards and electric shock.

• Installation of this display should only be performed by a qualified technician. Failure to

install this display properly may cause injuries and damages to the personnels and the

display itself. Check the installation regularly and maintain the display periodically to

ensure the best working condition.

• Use only the accessories approved or recommended by the manufacturer to mount this

display. Using wrong or unsuitable accessories may cause the display to fall and result in

serious personal injuries. Make sure that the surface and fixing points are strong enough

to sustain the weight of the display.

• To reduce the risk of electric shock, do not remove covers. No user serviceable parts

inside. Refer servicing to qualified service personnel.

• To prevent personal injuries, mounting the display or installing desktop stands is

required before use.

THIS EQUIPMENT MUST BE

GROUNDED

To ensure safe operation, the three-pin

plug must be inserted only into a

standard three-pin power outlet which

is effectively grounded through normal

household wiring. Extension cords

used with the equipment must have

three cores and be correctly wired to

provide connection to the ground.

Wrongly wired extension cords are a

major cause of fatalities.

The fact that the equipment operates

satisfactorily does not imply that the

power outlet is grounded or that the

installation is completely safe. For your

safety, if you are in any doubt about

the effective grounding of the power

outlet, please consult a qualified

electrician.

The lightning flash with arrowhead

symbol, within an equilateral triangle, is

intended to alert the user to the

presence of uninsulated "dangerous

voltage" within the product's enclosure

that may be of sufficient magnitude to

constitute a risk of electric shock to

persons.

The exclamation point within an

equilateral triangle is intended to alert

the user to the presence of important

operating and maintenance (servicing)

instructions in the literature

accompanying the appliance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BenQ RP703 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BenQ RP703

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info