Using the remote control
Power on, off and standby
Turning on the TV
After plugging the TV's power cable into a wall outlet and turning on the main power
switch, the TV will enter standby mode automatically. The power indicator will light up
red. Press (Power) on the remote control. The TV will turn on and the power indicator
will change to Green.
Putting the display to standby
Press (Power) on the remote control again, and the TV will return to standby mode.
The power indicator will turn red.
The display still consumes a very small amount of power (about 1W) in standby mode.
Turning the display off
You can turn the display power off by flipping the main power switch on the display to the
OFF position. The power indicator will be off.
• BeawarethatHDMIinputmustbeHDCP-complianttobedisplayed.
When switching to the HDMI inputs, the display needs several seconds to detect the HDCP
information from the signal source and no image will be displayed during this period. This is
not a malfunction.
Adjusting sound setting
Adjusting volume
• Press + on the remote control to increase volume. The volume indicator increases
in length as volume rises.
• Press - on the remote control to decrease volume. The volume indicator decreases
in length as volume falls.
Mute setting
Press (Mute) on the remote control to turn off the sound temporarily.
Press (Mute) once more, or press + to restore the sound level.
Switching inputs
1. Turn on all connected equipment or
devices before selecting an input.
2. Press INPUT on the TV to view
the current selected input. Press
INPUT button, use
▲▼
button to
select your desired input then press
OK button to confirm.
• Theseoptionswillonlyappearwhen
corresponding signals are connected
to the display.
