Bedienungsanleitung BenQ SH960 (Seite 28 von 63) (Englisch)

543652

Zoom out

Zoom in

Vorherige Seite

1/63

Nächste Seite

Using the projector

English

Setting the User 1/User 2 mode

There are two user-definable modes if the current available picture modes are not suitable for your need.

You can use one of the picture modes (except the selected User mode) as a starting point and customize the

settings.

1. In the Picture -- Basic menu, highlight Picture Mode and press /

to select User 1 or User 2 mode.

2. Press to highlight Load Settings From.

This function is only available when User 1 or User 2 mode is

selected up in the Picture Mode sub-menu item.

3. Press ENTER to display the Load Settings From page.

4. Press to highlight a picture mode that is closest to your need and

press ENTER.

5. Press to select a sub-menu item to be changed and adjust the

value with / . See "Fine-tuning the picture quality" on page 29

and "Advanced picture quality controls" on page 30 for details.

6. When all settings have been done, press MENU/EXIT to save and

leave the settings.

Renaming user modes

You can change User 1 and User 2 to the names easy to be identified or understood by the users of this

projector. The new name can be up to 12 characters including English letters (A-Z, a-z), digits (0-9), and

space (_).

To rename user modes:

1. In the Picture -- Basic menu, highlight Rename User Mode and press ENTER to display the Rename

User Mode page.

2. Press / to highlight the item you want to rename and press ENTER. The first letter will be

highlighted by a white box.

3. Press / to select the first character.

4. Press to move along until the new name is set and press ENTER to confirm.

5. Repeat steps 2-4 if you want to change the other names.

Resetting the picture mode

All of the adjustments you’ve done in the Picture -- Basic and Picture -- Advanced menus can be returned

to the factory preset values with a key press on the highlight of Reset.

To reset the picture mode to the preset factory values:

1. In the Picture -- Basic menu, highlight Picture Mode and press / to select the picture mode

(including User 1 or User 2) you want to reset.

2. Press to highlight Reset Picture Settings and press ENTER. The confirmation message is displayed.

3. Press / to highlight Reset and press ENTER. The picture mode will return to the factory preset

settings.

4. Repeat steps 1-3 if you want to reset other picture modes.

• The following settings will still remain: Color Temperature, Color Temperature User_ Fine Tuning,

Gamma Selection, Film Mode, 3D Comb Filter.

• Do not to be confused with the Reset Picture Settings function here with the Reset All Settings in the

Advanced Setup menu. The Reset All Settings function returns most of the settings to the factory

preset values system wide. See "Reset All Settings" on page 49 for details.

Picture Mode

Load Settings From

Brightness

Contrast

Tint

Sharpness

Reset Picture Settings

Rename User Mode

Picture -- Basic

S-Video

User 1

EXIT Back

ENTER

EXIT Back

Load Settings From

Cinema

Dynamic

Presentation

User 1

User 2

Expert Mode 1

+50

Color

+50

+ 3

sRGB

Expert Mode 2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BenQ SH960 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BenQ SH960

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info