Bedienungsanleitung BenQ sp870 (Seite 30 von 54) (Englisch)

214906

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

Operation

English

Optimizing the image

Using Wall Color

In the situation where you are projecting onto a colored surface such as a painted wall which may not be white,

the Wall Color feature can help correct the projected picture’s color to prevent possible color difference between

the source and projected pictures.

To use this function, go to the DISPLAY > Wall Color menu and press / to select a color which is the closest

to the color of the projection surface. There are several precalibrated colors to choose from: Light Yellow, Pink,

Light Green, Blue, and Blackboard

Selecting a picture mode

The projector is preset with several predefined picture modes so that

you can choose one to suit your operating environment and input

signal picture type.

To select an operation mode that suits your need, perform one of the

following steps.

•Press MODE on the projector or remote control repeatedly until

your desired mode is selected.

•Go to the PICTURE > Picture Mode menu and press / to

select a desired mode.

The picture modes available for different types of signals are listed

below.

PC input signals: D-Sub/Comp. (analog RGB), and DVI-D (DVI-D)

1. Dynamic mode: Maximizes the brightness of the projected image. This mode is suitable for environments

where extra-high brightness is required, such as using the projector in well lit rooms.

2. Presentation mode: Is designed for presentations. The brightness is emphasized in this mode to match PC

and notebook coloring.

3. sRGB mode: Maximizes the purity of RGB colors to provide true-to-life images regardless of brightness

setting. It is most suitable for viewing photos taken with an sRGB compatible and properly calibrated

camera, and for viewing PC graphic and drawing applications such as AutoCAD.

4. Cinema mode: Is appropriate for playing colorful movies, video clips from digital cameras or DVs through

the PC input for best viewing in a blackened (little light) environment.

5. User 1/User 2 mode: Recalls the settings customized based on the current available picture modes. See

"Setting the User 1/User 2 mode" on page 31 for details.

Video input signals: Component (YPbPr), S-Video, Video, D-Sub/Comp. (YPbPr), DVI-D (HDCP/

HDMI)

1. Dynamic mode: Is suitable for playing gamebox-based video games in a normal living room lighting level

environment.

2. Standard mode: Is appropriate for viewing colorful movies, video clips from digital cameras or DVs.

3. Cinema mode: Is suitable for enjoying dark movies or DVD movies best viewed in a blackened (little light)

home cinema or lounge room environment.

4. User 1/User 2 mode: Recalls the settings customized based on the current available picture modes. See

"Setting the User 1/User 2 mode" on page 31 for details. The User 1 and User 2 modes here are different

from the User 1 and User 2 modes defined under the D-Sub/Comp. (analog RGB)/DVI-D (DVI-D) signal

input.

A slight variation in the picture

brightness and colors may be

observed during the very short

time of switching picture

modes.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BenQ sp870 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BenQ sp870

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info