Bedienungsanleitung BenQ sp870 (Seite 33 von 54) (Englisch)

214906

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

Operation

English

Please refer to the illustration to the right for how the colors

relate to each other.

For example, if you select Red and set its range at 0, only pure

red in the projected picture will be selected. Increasing its range

will include red close to yellow and red close to magenta.

5. Press to highlight Saturation and adjust its values to your

preference by pressing / . Every adjustment made will

reflect to the image immediately.

For example, if you select Red and set its value at 0, only the

saturation of pure red will be affected.

6. Press to highlight Gain and adjust its values to your

preference by pressing / . This will affect the contrast level

of the selected primary color. Every adjustment made will be

reflected to the image immediately.

7. Repeat steps 3 to 6 for other color adjustments.

8. Make sure you have carried out all of the desired adjustments.

9. Press MENU/EXIT to exit and save the settings.

Setting the presentation timer

The presentation timer can indicate the presentation time on the

screen to help you achieve better time management when giving

presentations.

The Presentation Timer is only available when the input signal is

a PC or notebook with D-SUB/COMP. IN or DVI-D terminal in use.

Follow these steps to utilize this function:

1. Press TIMER SET UP on the remote control or go to the

SYSTEM SETUP: Basic > Presentation Timer menu and press

ENTER to display the Presentation Timer page.

2. Highlight Timer Period and decide the time period by pressing

/ . The length of time can be set from 1 to 5 minutes in 1-

minute increments and 5 to 240 minutes in 5-minute

increments.

If the timer is already on, the timer will restart whenever the Timer

Period is reset.

3. Press to highlight Timer Display and choose if you want the timer to show up on the screen by pressing

/ .

4. Press to highlight Timer Position and set the timer position

by pressing /

5. Press to highlight Timer Counting Direction and select your

desired counting direction by pressing / .

Selection Description

Always Displays the timer on screen throughout the presentation time.

1 min/2 min/3 min Displays the timer on screen in the last 1/2/3 minute(s).

Never Hides the timer throughout the presentation time.

Selection Description

Count Up Increases from 0 to the preset time.

Count Down Decreases from the preset time to 0.

RED

BLUE

GREEN

Yellow

Cyan

Magenta

Saturation is the amount of that

color in a video picture. Lower

settings produce less saturated

colors; a setting of “0” removes

that color from the image

entirely. If the saturation is too

high, that color will be

overpowering and unrealistic.

Presentation Timer

Timer Period

Timer Display

Timer Position

Timer Counting Direction

Timer Audible Reminder

Always

Top-Left

Count Down

Off

On Off

MENU Back

5 min

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BenQ sp870 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BenQ sp870

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info