Bedienungsanleitung BenQ SX930 (Seite 35 von 74) (Englisch)

648912

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

Using the projector

English

Setting a preferred color temperature

To set a preferred color temperature:

1. Highlight Color Temperature and select Cool, Normal, Warm or Lamp Native by pressing

/ on the projector or remote control.

2. Press to highlight Color Temperature Fine Tuning and press MODE/ENTER. The Color

Temperature Fine Tuning page is displayed.

3. Press / to highlight the item you want to change and adjust the values by pressing / .

• Red Gain/Green Gain/Blue Gain: Adjusts the contrast levels of Red, Green, and Blue.

• Red Offset/Green Offset/Blue Offset: Adjusts the brightness levels of Red, Green, and Blue.

4. To save and leave the settings, press MENU/EXIT.

Color Management

In most installation situations, color management will not be necessary, such as in classroom, meeting

room, or lounge room situations where lights remain on, or where building external windows allow

daylight into the room.

Only in permanent installations with controlled lighting levels such as boardrooms, lecture theaters, or

home theaters, should color management be considered. Color management provides fine color control

adjustment to allow for more accurate color reproduction, should you require it.

Proper color management can only be achieved under controlled and reproducible viewing conditions.

You will need to use a colorimeter (color light meter), and provide a set of suitable source images to

measure color reproduction. These tools are not provided with the projector, however, your projector

supplier should be able to provide you with suitable guidance, or even an experienced professional

installer.

The 3D Color Management provides six sets (RGBCMY) of colors to be adjusted to favorite colors.

When you select each color, you can independently adjust its color range and saturation according to

your preference.

To adjust and store the settings:

1. In the Picture menu, highlight Advanced... and press MODE/

ENTER. Then, highlight 3D Color Management and press

MODE/ENTER. The 3D Color Management page is displayed.

2. Highlight Primary Color and press / to select a color from

among Red, Green, Blue, Cyan, Magenta, and Yellow.

3. Press to highlight Hue and press / to select the color range

you wish to make adjustment. The bigger the range, the more

proportions of its two adjacent colors the color contains.

Please refer to the illustration to the right for how the colors relate

to each other. For example, if you select Red and set its range at 0,

only pure red is selected. Increasing its range will include both the red color close to yellow and red

color close to magenta.

Press to highlight Saturation and adjust the color saturation level by pressing / .

If you select Red and set its range at 0, only the saturation of the pure red will be affected.

Saturation is the amount of that color in a video picture. Lower settings produce less saturated

colors; a setting of “0” removes that color from the image entirely. If the saturation is too high, that

color will be overpowering and unrealistic.

4. To leave and save the settings, press MENU/EXIT.

Red

Yellow

Green

Cyan

Magenta

Blue

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BenQ SX930 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BenQ SX930

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info