Bedienungsanleitung BenQ TS819ST (Seite 25 von 62) (Englisch)

648956

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

Operation 25

Disabling the password function

To disable password protection, go back to the SYSTEM SETUP: Advanced >

Security Settings > Change Security Settings menu after opening the OSD menu

system. Press MODE/ENTER. The message “INPUT PASSWORD” displays. Enter

the current password.

i. If the password is correct, the OSD menu returns to the Security Settings

page.

Press to highlight Power On Lock and press / to select Off. You will

not have to enter the password next time when turning on the projector.

ii. If the password is incorrect, the password error message displays lasting for

three seconds, and the message “INPUT PASSWORD” displays for your

retry. You can press MENU/EXIT to cancel the change or try another

password.

Though the password function is disabled, you need to keep the old password in hand should you ever need to

re-activate the password function by entering the old password.

Switching input signal

The projector can be connected to multiple devices at the same time. However, it can only

display one full screen at a time. When starting up, the projector automatically searches for

the available signals.

Be sure the Quick Auto Search function in the SOURCE menu is On if you want the

projector to automatically search for the signals.

To select the source:

1. Press SOURCE on the projector or remote

control. A source selection bar displays.

2. Press / until your desired signal is selected

and press MODE/ENTER.

Once detected, the selected source information

will display at the corner of the screen for

seconds. If there is multiple equipment

connected to the projector, repeat steps 1-2 to

search for another signal.

• The brightness level of the projected image will change

accordingly when you switch between different input signals.

Data (graphic) "PC" presentations using mostly static images

are generally brighter than "Video" using mostly moving

images (movies).

• The native display resolution of this projector is in a 4:3

(MX819ST/TS819ST)/16:10 (MW820ST/TW820ST) aspect ratio. For best display picture results, you

should select and use an input signal which outputs at this resolution. Any other resolutions will be scaled

by the projector depending upon the “aspect ratio” setting, which may cause some image distortion or

loss of picture clarity. See "Selecting the aspect ratio" on page 26 for details.

Changing Color Space

In the unlikely event that you connect the projector to a DVD player via the projector’s

HDMI input and the projected picture displays wrong colors, please change the color

space to YUV.

To d o t h i s :

1. Press MENU/EXIT and then press / until the SOURCE menu is highlighted.

Computer1/YPbPr1

Computer2/YPbPr2

HDMI

Video

S-Video

Network Display

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BenQ TS819ST Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BenQ TS819ST

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info