Bedienungsanleitung BenQ W1100 (Seite 34 von 65) (Englisch)

468801

Zoom out

Zoom in

Vorherige Seite

1/65

Nächste Seite

Operation34

This adjustable item utilizes a new color-processing algorithm and system level

enhancements to enable higher brightness while providing true, more vibrant colors in

picture. The range is from 1 to 3. If you prefer a stronger enhanced image, adjust toward the

maximum setting. For a smoother, more natural image, adjust toward the minimum setting.

3D Color Management

In most installation situations, color management will not be necessary, such as in

classroom, meeting room, or lounge room situations where lights remain on, or where

building external windows allow daylight into the room.

Only in permanent installations with controlled lighting levels such as boardrooms, lecture

theaters, or home theaters, should color management be considered. Color management

provides fine color control adjustment to allow for more accurate color reproduction,

should you require it.

Proper color management can only be achieved under controlled and reproducible viewing

conditions. You will need to use a colorimeter (color light meter), and provide a set of

suitable source images to measure color reproduction. These tools are not provided with the

projector, however, your projector supplier should be able to provide you with suitable

guidance, or even an experienced professional installer.

The Color Management provides six sets (RGBCMY) of colors to be adjusted. When you

select each color, you can independently adjust its range and saturation according to your

preference.

If you have purchased a test disc which contains various color test patterns and can be used

to test the color presentation on monitors, TVs, projectors, etc. You can project any image

from the disc on the screen and enter the 3D Color Management menu to make

adjustments.

To adjust the settings:

1. Go to the PICTURE: Advanced menu and highlight 3D Color Management.

2. Press MODE/ENTER and the 3D Color Management page displays.

3. Highlight Primary Color and press / to select a color from among Red, Yellow,

Green, Cyan, Blue, or Magenta.

4. Press to highlight Hue and press / to select its range. Increase in the range

will include colors consisted of more proportions of its two adjacent colors.

Please refer to the illustration to the right for

how the colors relate to each other.

For example, if you select Red and set its

range at 0, only pure red in the projected

picture will be selected. Increasing its range

will include red close to yellow and red close

to magenta.

5. Press to highlight Saturation and adjust

its values to your preference by pressing /

. Every adjustment made will reflect to the

image immediately.

For example, if you select Red and set its

value at 0, only the saturation of pure red will be affected.

Saturation is the amount of that color in a video picture. Lower settings produce less

saturated colors; a setting of “0” removes that color from the image entirely. If the saturation

is too high, that color will be overpowering and unrealistic.

RED

BLUE

GREEN

Yellow

Cyan

Magenta

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BenQ W1100 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BenQ W1100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info