Bedienungsanleitung BenQ W1200 (Seite 28 von 65) (Englisch)

468802

Zoom out

Zoom in

Vorherige Seite

1/65

Nächste Seite

Operation28

i. If the password is correct, the OSD menu returns to the Security Settings page

with 'Off'shown in the row of Power on Lock. You will not have to enter the

password next time you turn on the projector.

ii. If the password is incorrect, the password error message displays lasting for three

seconds, and the message 'INPUT PASSWORD' displays for your retry. You can

press MENU/EXIT to cancel the change or try another password.

Though the password function is disabled, you need to keep the old password in hand should

you ever need to re-activate the password function by entering the old password.

Switching input signal

The projector can be connected to multiple devices at the same time. However, it can only

display one full screen at a time. When starting up, the projector automatically searches for

the available signals.

Be sure the Quick Auto Search function in the SOURCE menu is On (which is the default of

this projector) if you want the projector to automatically search for the signals.

You can also manually cycle through the available

input signals.

1. Press SOURCE on the projector. A source

selection bar displays.

2. Press / until your desired signal is

selected and press MODE/ENTER. You may

press Source selection keys on remote control.

Once detected, the selected source information will display on the screen for seconds.

If there is multiple equipment connected to the projector, repeat steps 1-2 to search for

another signal.

• The brightness level of the projected image will change accordingly when you switch

between different input signals. Data (graphic) "PC" presentations using mostly static

images are generally brighter than "Video" using mostly moving images (movies).

• The input signal type effects the options available for the Picture Mode. See "Selecting a

picture mode" on page 31 for details.

• The native display resolution of this projector is in a 16:9 aspect ratio. For best display

picture results, you should select and use an input signal which outputs at this resolution.

Any other resolutions will be scaled by the projector depending upon the 'aspect ratio'

setting, which may cause some image distortion or loss of picture clarity. See "Selecting

the aspect ratio" on page 29 for details.

Changing Color Space

In the unlikely event that you connect the projector to a DVD player via the projector's

HDMI input and the projected picture displays wrong colors, please change the color space

to YUV.

1. Press MENU/EXIT and then press / until the DISPLAY menu is highlighted.

2. Press to highlight SOURCE and press MODE/ENTER.

3. Press to highlight Color Space Conversion and press / to select a suitable

color space.

This function is only available when the HDMI input port is in use.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BenQ W1200 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BenQ W1200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info