Bedienungsanleitung BenQ W2000 (Seite 5 von 63) (Englisch)

648898

Zoom out

Zoom in

Vorherige Seite

1/63

Nächste Seite

Important safety instructions

13. This projector is capable of displaying inverted

images for ceiling mount installation. Use only

BenQ's Ceiling Mount Kit for mounting.

Ceiling mounting the projector

If you intend to mount your projector on the ceiling,

we strongly recommend that you use a proper fitting

BenQ projector ceiling mount kit and ensure it is

securely and safely installed.

If you use a non-BenQ brand projector ceiling mount

kit, there is a safety risk that the projector may fall

from the ceiling due to an improper attachment

through the use of the wrong gauge or length screws.

You can purchase a BenQ projector ceiling mount kit

from the place you purchased your BenQ projector.

BenQ recommends that you also purchase a separate

Kensington lock compatible security cable and attach

it securely to both the Kensington lock slot on the

projector and the base of the ceiling mount bracket.

This will perform the secondary role of restraining

the projector should its attachment to the mounting

bracket become loose.

14. Do not attempt to disassemble this projector.

There are dangerous high voltages inside which

may cause death if you should come into contact

with live parts. The only user serviceable part is

the lamp. See page 50.

Under no circumstances should you ever undo or

remove any other covers. Refer servicing only to

suitably qualified professional service personnel.

Please keep the original packing for possible

future shipment. If you need to pack your

projector after use, adjust the projection lens to

an appropriate position, put the lens cushion

around the lens, and fit the lens cushion and

projector cushion together to prevent damage

during transportation.

15. When you think service or repair is required,

take the projector only to a suitably qualified

technician.

Moisture condensation

Never operate the projector immediately after

moving it from a cold location to a hot location.

When the projector is exposed to such a change

in temperature, moisture may condense on the

crucial internal parts. To prevent the projector

from possible damage, do not use the projector

for at least 2 hours when there is a sudden change

in temperature.

Avoid volatile liquids

Do not use volatile liquids, such as insecticide or

certain types of cleaner, near the projector. Do

not have rubber or plastic products touching the

projector for a long time. They will leave marks on

the finish. If cleaning with a chemically treated

cloth, be sure to follow the cleaning product’s

safety instructions.

Disposal

This product contains the following materials

which are harmful to human bodies and

environment.

• Lead, which is contained in solder.

• Mercury, which is used in the lamp.

To dispose of the product or used lamps, consult

your local environment authorities for regulations.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BenQ W2000 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BenQ W2000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info