648898
18
Zoom out
Zoom in
Vorherige Seite
1/63
Nächste Seite
18
Connection
Connecting a wireless Full HD Kit (WDP02)
The next generation of Wireless Full HD kit is available from the place you purchased the projector.
The projector is designed to accommodate a receiver by which the projector receives a signal from a
transmitter and displays transmitted images. Refer to the illustrations below for a quick connection of the
wireless transmission device.
1. Turn the power off and disconnect the
projector from the power outlet. If the lamp
is hot, avoid burns by waiting for
approximately 45 minutes until the lamp has
cooled.
6. Connect appropriate AV equipment to the
transmitter.
7. Power on the projector and switch to the
HDMI3/MHL input source.
8. For more operation details, refer to the user
manual of the Wireless Full HD Kit (WDP02).
There will be customized firmware released for the
W2000 after the WDP02 is launched in 2016. It will
provide more integrated functions to operate the
WDP02 along with the W2000. Please contact your
local BenQ service center to update the firmware of
your projector should you need it.
2. Loosen the screws that secure the lamp
cover on the top of the projector until the
lamp cover loosens.
3. Remove the lamp cover from the projector.
4. Place the receiver into the compartment, and
press it backwards and then downwards until
it clicks into place.
5. Plug the HDMI cable and USB Mini-B cable to
the receiver.
Do not strain the HDMI cable and USB cable
as this could cause malfunction to the cables.
* About the HDMI cable
The HDMI cable is also compatible with MHL
devices. You need just to use an HDMI female to
female adaptor (shorter than 4.0 cm) and a wireless
MHL smart dongle (shorter than 7.9 cm) (e.g. Roku
streaming stick). The projector is ready to project
streaming video from the dongle wirelessly. Note
that if the projector’s firmware is updated to the
customized version as mentioned above, the HDMI
cable will not be compatible with MHL devices.
3
1
2
1
2 2
1
2
2
1
4.
6
cm
cm
10
.
2
18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für BenQ W2000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von BenQ W2000

BenQ W2000 Bedienungsanleitung - Deutsch - 71 seiten

BenQ W2000 Bedienungsanleitung - Holländisch - 68 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info