648878
39
Zoom out
Zoom in
Vorherige Seite
1/79
Nächste Seite
Menu Functions 39
Basic OSD menu - without input signals connected
As there’s no input signal to your projector, only the submenus of Settings under Basic
OSD menu - with input signals connected are available. Menu options that are not available
will become grayed out.
To access the OSD menu, press MENU on the projector or remote control.
•Use the arrow keys (///) on the projector or remote control to move through
the menu items.
•Use OK to confirm the selected menu item.
To switch from the Basic OSD menu to the Advanced OSD menu, see "About the OSD Menus"
on page 34.
Menu Submenus and Descriptions
3D Sync Mode Selects a sync mode for your 3D glasses.
Projector Position
The projector can be installed on a ceiling or behind a screen, or with
one or more mirrors. See "Choosing a location" on page 16 for details.
Test P at ter n
Enables this function to display the grid test pattern, which helps you
adjust the image size and focus so as to check if the projected image is
free of distortion.
Auto Source Search
Sets whether the projector searches automatically for input sources.
Select On to enable the projector to scan for input sources until it
acquires a signal. If the function is set to Off, the projector selects the
last used input source.
Menu Type Switches to the Advanced OSD menu.
HDMI Format
Selects an input source type for the HDMI signal. You can also manually
select the source type. The different source types carry different
standards for the brightness level.
HDMI Format is only available when the HDMI signal is selected.
Reset Lamp Timer
Activates this function only after a new lamp is installed. When you select
Reset, a "Reset Successfully" message displays to notify that the lamp
time has been reset to "0".
Reset All Settings
Returns all settings to the factory preset values.
The following settings will still remain: Keystone, Language,
Projector Position, and Reset Lamp Timer.
Information
Displays the following information about your projector.
Source: Displays the current signal source.
Picture Mode: Displays the current Picture Mode.
Resolution: Displays the native resolution of the input source.
Color System: Displays input system format.
Lamp Usage Time: Displays the number of hours the lamp has
been used.
3D Format: Displays the current 3D mode.
3D Format is only available when 3D Mode is enabled.
Firmware Version: Displays the firmware version of your
projector.
Some information is given only when certain input sources are in
use.
39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für BenQ W3000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von BenQ W3000

BenQ W3000 Bedienungsanleitung - Deutsch - 79 seiten

BenQ W3000 Bedienungsanleitung - Holländisch - 79 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info