Bedienungsanleitung BenQ W3000 (Seite 56 von 79) (Englisch)

648878

Zoom out

Zoom in

Vorherige Seite

1/79

Nächste Seite

Menu Functions56

High Altitude Mode

It is a mode for operation in areas like high altitude or high temperature. Activate

the function when your environment is between 1500 m –3000 m above sea level

and ambient temperature is between 0°C–30°C.

Do not use the High Altitude Mode if your altitude is between 0 m and 1500

m and temperature is between 0°C and 30°C. The projector will be over

cooled, if you turn the mode on under such a condition.

Operation under High Altitude Mode may cause a higher decibel operating

noise level because of increased fan speed necessary to improve overall system

cooling and performance.

If you use this projector under other extreme conditions excluding the above, it

may display auto shut-down symptoms, which is designed to protect your

projector from over-heating. In cases like this, you should switch to High Altitude

mode to solve these symptoms. However, this is not to state that this projector

can operate under any and all harsh or extreme conditions.

Password

For security purposes and to prevent unauthorized use, you may set up password

security for the projector. See "Utilizing the password function" on page 41 for

details.

•Change Password

You will be asked to enter the current password before changing to a new one.

•Power On Lock

Limits use of the projector to only those who know the correct password.

Key Lock

With the control keys on the projector locked, you can prevent your projector

settings from being changed accidentally (by children, for example).

When you select On to enable this function, no control keys on the projector will

operate, except POWER.

To unlock the keys, press ► and hold on the projector for 3 seconds.

LED Indicator

When you select On, all LED indicators on the projector function normally. See

"Indicators" on page 69 for more details.

When you select Off, the LED indicators are off after you turn on the projector

and the splash screen displays. However, if the projector is not working properly,

the LED indicators light or flash to remind you that a problem may occur. See also

"Indicators" on page 69 for more details.

Reset All Settings

Returns all settings to the factory preset values. The OSD menu type will return

to the Basic OSD menu.

The following settings will still remain: Keystone, Language, Projector

Position, Reset Lamp Timer, High Altitude Mode, Password, Key Lock, and

ISF.

ISF

The ISF calibration menu is password protected and only accessible by authorized

ISF calibrators. The ISF (Imaging Science Foundation) has developed carefully

crafted, industry-recognized standards for optimal video performance and has

implemented a training program for technicians and installers to use these

standards to obtain optimal picture quality from BenQ video display devices.

Accordingly, we recommend that setup and calibration be performed by an ISF

certified installation technician.

For more information, please go to www.imagingscience.com or contact

the place you purchased the projector.

Submenu Functions and Descriptions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BenQ W3000 Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BenQ W3000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info