Bedienungsanleitung Beper 90002 (Seite 11 von 36) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

710407

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Thermoelectric refrigerator Use instructions

12. Do not use the appliance near inammable objects.

13. Do not place objects in the slots of the appliance.

DESCRIPTION OF THE ITEM Fig. 1

1. Temperature Adjustor

2.Light

3 Fan mask

4. Shelf

5. Grid grooves

6. Foot

7. Condensate collection tray

8. Ream cover

9. Opening handle

10. Compartment

11. Bottles compartment

12. Sealing gasket

13. Door

14. Power cord

FRIDGE SETTING

Remove all packing material and accessories. Examine the fridge to see that there are no damages. Do not

install the fridge if damaged.

Place on a at surface that provides enough space for ventilation. Leave a minimum free space of 5 cm for the

sides of the fridge and 10 cm for the back side.

The fridge is not designed for recessed use, because it needs to keep proper ventilation on its parts.

The fridge should not be used close to sources that produce heat or cold.

Do not climb over the fridge, avoid the bumps.

Do not use the fridge as a holder for objects or containers.

Do not open the fridge door frequently, especially when it is very hot; in any case close the door after a short

time after opening.

Do not use the fridge, exposing it to dangerous atmospheres due to its integrity, such as rain, wind, excess

moisture, chemicals, gas, sunlight, etc.

Do not introduce food or drinks that are too hot inside the refrigerator.

If the food or drinks extracted from the fridge have odor or strange color, it is advisable not to consume them,

they are probably out of date.

We recommend installing the fridge in a place where the temperature is between 10-26 ° C. If the room tempera-

ture is higher or lower than the recommended one, the performance of the appliance may be affected.

Climate class SN: room temperature + 10 ° C to + 32 ° C

Climate class N: room temperature from + 16 ° C to + 32 ° C

REVERSE THE DOOR

The fridge was assembled with the front door open from left to right. Fig.2

The door brackets are located on the right side of the fridge. Fig.3

If you want to change the way the door is opened, follow the steps below.

Empty the inside of the fridge completely from any food or drink. Disconnect the power cord from the electrical

outlet.

Two screwdrivers are needed, one with a cross head and one with a thin at head.

Remove the upper and lower covers of the brackets using the at head screwdriver, inserting it into the grooves

to lift them.

Using the cross-head screwdriver unscrew all the screws that hold the brackets securely and remove them. Be

careful not to drop the front door when it is disconnected.

1 - Do not overturn the fridge to remove the lower bracket.

2 - Replace the brackets on the other side of the fridge, securely fastening the screws and reinserting the covers

on the brackets. Fig.4

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Beper 90002 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info