Bedienungsanleitung Beper BB103 (Seite 9 von 28) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

710528

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Electric Kettle Use Instructions

HOW TO USE IT ?

1. Place the kettle on a stable surface.

2. Remove the kettle body (F) from the base (I) and ll it with water, respecting MIN and MAX levels indicated on

the water level indicator (E). Water can be lled by opening the lid (A) or through the pouring spout (B). Close the

lid and put the kettle body (F) on the base (I). Plug the appliance to the electric socket.

3. Press on/off switch (G) downwards and the kettle starts to operate. The power indicator (H) lights up. When

both the switch and the light turn off, water is ready to be used. Press on/off switch downwards to interrupt the

cooking anytime in case of necessity.

4. Lift the kettle body (F) only by the handle (D).

The kettle body becomes very hot and must not be touched directly with hands.

5. Disconnect the cord supply form the electric socket.

To prepare tea with tea leaves:

1. Remove the lid (A) from the kettle body (F).

2. Add the desired quantity of tea leaves into the tea lter (C).

3. Insert the open edge of the lter (C) to the lower part of the lid (A) until it ts in place.

4. Put the attachment of lid and lter slowly inside the kettle with water already ready (If necessary switch on the

kettle the second time).

5. If tea is not to be served immediately after the brewing time, it is recommended to remove the lter with used

tea leaves from the hot water to avoid their prolonged contact with water, that may alter the avour and taste of

tea.

6. Close the kettle with the lid after removing the lter.

CLEANING

1. Unplug the appliance from the socket.

2. Let it cool down and clean with a damp sponge.

3. Do never use abrasive sponge to clean it.

4. Clean regularly, at least one a month if the water is had or more if the water is very hard.

To remove lime scale, use:

White wine vinegar 8°:

Fill the kettle with ½ liter of vinegar.

Let it for about one hour without heating it.

Empty the kettle and rinse 5 or 6 times.

Repeat if necessary.

Acid citric:

Make boiled 1 liter of water – add 25 g of acid citric and let it rest for about 15 minutes.

Empty the kettle and rinse it 5 or 6 times.

Repeat if necessary.

Do not use other methods or detergents to remove limescale.

In case of :

Use while empty

The kettle is on but without water in or the limescale activates the safety system and blocks the unit: let the

kettle cool down and ll it with water. Use the on/off switch to turn it on: the kettle will start again after approx.

15 minutes.

Smelly water

It does happen when the kettle is new. For the rst times of use, throw away water. If the problem remains, ll

the kettle to MAX. level, and add 2 spoons of bicarbonate; boil it, throw away water and rinse the kettle body.

TECHNICAL DATA

Power: 1850 - 2200W

Power supply: 220-240V ~ 50/60Hz

For any improvement reasons, Beper reserves the right to modify or improve the product without any

notice.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Beper BB103 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info