Bedienungsanleitung Beper BF700 (Seite 11 von 56) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

710426

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Induction cooker Use instructions

Power setting

Touch the “Function” button on the panel once. The appliance switches on, the display shows “1600W ‘.

With the “+” and “-” keys you can adjust the desired power from 200 to 2000W.

At the end of cooking touch the ON/OFF button to switch off the appliance.

Timer after power setting

Press “Timer” during cooking. The “timer” indicator lights up, and “0:10” ashes on the display.

Use the “+” and “-” keys to set the cooking time, from 0 to 4 hours.

For a few seconds the display will show the set cooking time.

The display shows the selected power and the remaining time.

Cooking will stop when the set time has run out.

Cooking with temperature adjustment

Press the “Function” button 2 times. The appliance switches on, the display shows “180 C”.

Set the desired cooking temperature with the “+” and “-” buttons. There are 10 adjustable levels ranging from

60°C to 240°C.

Timer after temperature setting

Press “Timer” during cooking. The “timer” indicator lights up, and “0:10” ashes on the display.

Use the “+” and “-” keys to set the cooking time, from 0 to 4 hours.

For a few seconds the display will show the set cooking time.

The display shows the selected temperature and the remaining time.

Cooking will stop when the set time has run out.

Key lock

To lock the keypad of the control panel press the “Lock” button for a few seconds during use.

The “Lock” button light comes on to indicate the lock.

To unlock, press the “Lock” button again for a few seconds.

Security systems

The appliance switches off automatically if there is no cooking container, or it is removed, or is a material not

suitable for induction cooking.

In this case the product will beep for about 60 seconds, and then it will go into stand-by mode.

Each time the product is turned off with the ON/OFF button, the fan will continue to run for about 30 seconds, so

as to cool every part of the appliance.

To turn off the product always use the ON/OFF button, do not turn it off by removing the cooking pan.

Error messages

Error Cause Solution

E0 The cooking container is not suitable

The cooking container is not positioned in

the cooking area

Use a cooking container for induction cooking

and place it in the centre of the cooking area

E1 Error in the internal circuit Contact the after sales service

E2 Internal overheating Use a suitable cooking container

Check that the ventilation fan is not obstructed

If the problem persists, contact the after sales

service

E3/E4 High or low voltage Connect to an electrical network as indicated

on the label on the product

E5 Error or short circuit on the temperature

sensor or other parts

Contact the after sales service

E6 Overheating of the cooking glass Allow to cool and remove the container,

after cooling you can resume cooking

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Beper BF700 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info