Bedienungsanleitung Beper BP802 (Seite 6 von 36) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

710236

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Kitchen scale Use instructions

Caution: low batteries become dangerous due to the possible loss of electrolyte which is very cor-

rosive. To avoid damage to the appliance caused by such an eventuality, replace the exhausted

batteries without delay.

If the scale remains unused for a long period of time, it is recommended to remove the batteries from

the battery compartment, to prevent the inside corrosive liquid from escaping causing serious dama-

ge to the scale. Any damage caused by the battery uid is not recognized in the warranty.

Battery replacement

When the scale does not switch on and the word “LO” appears on the display or its operation is abnormal, it

means that the batteries are empty. Replace them with new ones with the same technical characteristics.

Follow the instructions in the paragraph “battery installation” to insert the new batteries.

The exhausted batteries must be disposed of through the appropriate collection network. Do not throw batteries

into a re. Do not throw batteries in the environment.

Use

Place the scale on a at and stable surface.

Place the container on the weighing base.

Press the M/A button; the display shows “0” and the weighing mode (kg).

The scale has two units of measurement: kg and lb. You can change the unit of measurement of the weight by

moving the switching lever on the back of the scale.

Proceed with weighing, placing the food in the container; the value will be automatically visible

on the display.

To weigh different types of ingredients in the same container, press the TARE key, between one

ingredient and the other, to clear the display.

The scale switches off automatically within 90 seconds of the end of weighing or if not used.

We recommend turning it off by pressing the M/A button to optimize battery life.

The scale weighs a maximum of 5 kg to prevent damage if the message appears on the display “EE” indicates

that the weighing limit has been exceeded, immediately remove the objects from the weighing plate in order to

avoid damage to the balance.

Cleaning

The scale can be cleaned with a soft cloth slightly moistened with warm water. The container can be cleaned

with delicate dish soap.

Do not clean with thinners, abrasive products in general; these could damage the surface of the balance.

Do not immerse the scale in water.

Protect from liquid inltration.

Keep hair preparations, cosmetics or bath solutions away from the balance; they can be cause damage to the

aesthetic parts and the internal circuit of the balance.

Technical data

Maximum capacity: 5 KG/11 lb

Graduation: 1 gr/1 Oz

Power supply: 4 batteries type AA - 1.5 V (not included)

For any improvement reasons, Beper reserves the right to modify or improve the product without any

notice.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Beper BP802 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info