Bedienungsanleitung Beper P206VEN100 (Seite 9 von 52) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

711193

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Stand fan Use instructions

Description of the item Fig.A

1. Front grid

2. Closure nut

3. Nut blades

4. Blades

5. Rear grid nut

6. Rear grid

7. Motor

8. Swing button

9. Body motor

10. Inclination set button

Assembly instructions Fig. B

Put the base on the oor.

Insert the inner pole inside the outer pole.

Insert the base ornamental pin and x the high adjustment handle.

Fix the pouter pole to the base with the 4 screws (included in packaging).

Important: rmly fasten the screws to the base in order to guarantee the good stability of the fan,

otherwise the fan will dangerously swing.

Take off the outer pole, and adjust it to the desired height. Securely fasten the high adjustment handle.

Place the control panel on the pole.

Fasten completely with the screw, so that the control panel is well xed onto the inner pole.

Place the rear grid on the motor, so that the holes of the grid are well inserted into the motor of the fan.

Firmly and securely fasten the rear grid in order to block the grid on the motor.

Insert the blades of the fan on the motor and completely screw the nut blade on the motor, in order to block the

body motor.

Assembly the 2 grids (front and rear) by inserting the closure nut, place the front grid on the rear grid.

Close the nuts to block the grids.

Speed selection

Choose the desired speed by pressing on the buttons of the control panel.

Position 0 the fan is off.

Position 1 for low speed.

Position 2 for medium speed.

Position 3 for high speed.

When the fan is on, the night light switches on.

Head inclination

It is possible to choose various positions and change the air ow direction.

Before adjusting the inclination, switch off the fan.

Take the motor body, unscrew the regulation axis and change the inclination of the fan as desired; then fasten

rmly.

Warning: do not try to force the inclination position in order to avoid any failure.

Swing function

When pressing the swing button, it is possible to activate or deactivate the swing function, by pressing the swing

pin. Swing function provides a more even distribution of air ow in the room.

To activate the swing function, push the swing pin down until completely blocked; the head fan turns automati-

cally from right to left.

To deactivate the swing function, raise the pin completely.

Cleaning

Before cleaning, switch off and unplug the fan.

For cleaning use a soft cloth, that may be slightly damp.

Do not use alcohol or chemical substances, or any detergent that could damage this appliance.

11. Night light

12. Control panels

13. Screw for pipe

14. Inner pole

15. Outer pole

16. High adjustment handle

17. Base fastening screws

18. Base ornamental pin

19. Base

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Beper P206VEN100 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info