711330
10
Zoom out
Zoom in
Vorherige Seite
1/36
Nächste Seite
Tripod Fan Use instructions
10
PRODUCT AND ACCESSORIES Fig.A
1. Telescopic tube
2. Adjust high nut
3. Legs holder
4. Legs
5. Rubber feet
6. Motor
7. Grid locking hooks
8. Blade
9. Front and back grid
10. Swing on/off button
11. Adjust inclination knob
FAN ASSEMBLY Fig.B
1. Insert and screw the legs in the legs holder.
2. Adjust the high of the telescopic tube
3. Insert the motor on the telescopic tube and x it with the appropriate screws.
4. Place the back grid in the housing and secure it with the 4 screws.
5. Place the blade and secure it with the appropriate screw.
6. Place the front grid and secure it with the screw and the locking hooks.
Important: Firmly weld all components and assure that the legs will be open completely, to ensure good
stability of the fan, otherwise it could oscillate dangerously.
SPEED SELECTION
Choose the speed desired pressing on the buttons of the control panels.
Position 0 the fan switch off.
Position 1 low speed.
Position 2 medium speed.
Position 3 high speed.
HEAD INCLINATION
It is possible to choose various positions and change the air ow swing.
Before changing it, switch off the fan.
Take the motor body, unscrew the adjust inclination knob and change the inclination of the fan as desired and
screw the knob strongly.
Attention : do not try to force the inclination position in order to avoid any failure.
SWING
It is possible to activate or disconnect the swing of the fan, by touching appropriate button. Swing allow to provide
the air uniformly.
To activate the swing push the button down until completely blocked ; the head fan turns automatically from right
to left.
To disconnect the swing raise the button completely.
CLEANING
Before cleaning, switch off and unplug the fan.
For cleaning use a soft cloth, that may be softly wet.
Do not use alcohol or chemical substances, or any detergent that could damage this appliance.
Do not allow water or other liquids to penetrate in the fan, in order to protect it.
After cleaning, dry every parts before using the appliance.
During the winter and when not used, keep this appliance in a dry and clean place.
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Beper VE119 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info