Bedienungsanleitung Berbel BEH 90 FLU (Seite 32 von 36) (Englisch)

784240

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Dismounting

6006190_a – 20.05.2022

The smoke can settle on furniture, the fronts of kitchen units and

the ceiling.

ySmoke development by heating cooking oils and cooking

fats to too high a temperature.

☞Note the smoke point of the cooking oil or fat you

are using. You can obtain this information from the

respective manufacturer.

Moisture in the device.

yDripping or splashing water has penetrated the device.

yLiquid (e.g. from vases, bottles on the device) has

penetrated the device.

☞Immediately shut off the power supply, by removing

the fuse.

☞Make sure that the power supply cannot be

unintentionally reconnected. For example by tasking

a person with ensuring that the fuse/breaker is not

restored/switched on.

☞Ensure that no more liquid can penetrate the device.

☞Allow the device to dry.

☞Have the device checked and repaired by qualified,

specialist personnel prior to using the device again.

If a fault persists:

☞Please consult your dealer or customer services.

7. Dismounting

DWARNING!

Risk of death due to electric shock!

Touching live parts can cause an electric shock, burns or

death.

☞Disconnect all poles of the power supply for the device.

☞Ensure that the voltage supply is and remains

disconnected while the following work is in progress.

DWARNING!

Danger of injuries through improper handling!

Taking the device down requires a great deal of physical

exertion due to its size and weight. If the device falls down,

serious injuries are possible.

☞Two persons are required to take the device down.

☞Ensure stable footing when taking the device down.

☞Ensure that no other people are in the working area.

DATTENTION!

Danger of property damage through improper handling!

Taking the device down requires a great deal of physical

exertion due to its size and weight. If the device falls, the

device, kitchen furnishings and other objects could be

damaged.

☞Cover the cooled hob.

☞Keep the installation area clear.

☞Pull out the mains plug.

☞Remove any accessory connection cables.

In extracted air mode:

☞Remove the exhaust air duct.

In recirculated air mode:

☞Remove the filter.

☞Remove the lower section and the Capillar Trap.

☞Release the angle trim strip from the retaining clips on

the hood body.

☞Remove the fixing screws from the bottom of the hood

body.

☞Hold the hood body firmly from below.

☞Release the hood body from the fastening brackets by

pressing down on the levers.

If the levers are not reachable:

☞Turn the threaded bolts (not included in the scope of

supply) parallel into the holes of the fixing screws.

This results in the hood body being pressed downwards.

☞Set the hood body down on a firm and protective surface.

☞Unscrew the fastening brackets.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Berbel BEH 90 FLU Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Berbel BEH 90 FLU

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info