Bedienungsanleitung Berbel BEH 90 GL (Seite 12 von 36) (Englisch)

784228

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Installation

6005145_a – 01.06.2022

3.5 Installation procedure

Short overview:

1. Preparation for installation

2. Unpack the device

3. Removing the lower shell, bulging edge and capillary trap

4. Install the device

5. Connect accessories

6. Fit the BackFlow port

7. Connect accessories

8. Connect exhaust air ducting (with exhausted air or hybrid

operation)

9. Insert the capillary trap, bulging edge and lower shell

10. Establish electrical power supply

11. Check and carry out commissioning

3.5.1 Preparation for installation

The device is designed for installation in kitchen units.

The installation sequence may vary, depending on the local

conditions.

☞Check that your device fits with the intended installation

situation.

D“2.5 Installation variants and installation dimensions”

(page 7).

☞Make sure that all required parts are present.

D“2.4 Scope of delivery” (page 7).

☞Familiarise yourself with the installation situation and the

associated documents.

yDevice and instructions.

yAccessories.

yInstallation location.

yIntended operating mode.

☞Assemble the tools and materials required:

yStable stepladder

yFolding rule or measuring tape

yPencil

yPhillips head screwdriver, size 2

ySlotted screwdriver SL 2.5 x 0.4

ySW 2.5 mm Allen key

yJigsaw

yCutter blade

yProtective material (e.g. thick cardboard) for the hob

and the worktops

☞Keep the installation area free of objects that could be in

the way or that could be damaged.

☞Make sure that the hob and other parts that could be

touched have cooled down.

☞Protect the hob and other surfaces in the installation area

(e.g. with thick cardboard).

☞Ensure that the power supply is switched off and remains

so. Connect the power supply only when instructed to do

so in the installation instructions.

If accessories (e.g. wall box, window contact switch) are

required for the installation:

Observe the instructions for the accessories.

☞Ensure that the accessories are correctly installed and

ready for connection.

☞Ensure that the connection cables from accessories are

correctly routed and accessible.

3.5.2 Unpack the device

DATTENTION!

Hazard of glass breaking or other damage due to

incorrect handling!

The device and its surfaces can be damaged when being

unpacked or transported.

☞Do not cut into the protective cardboard packaging.

☞Keep objects that could scratch the device far away from

it (e.g. tools, belt buckles).

☞Unpack the device and all accompanying parts carefully.

☞Place the device on its back on a firm, clean and

protective surface (e.g. thick cardboard).

☞Check the device and its constituent parts for damage.

☞Check the delivery is complete.

D“2.4 Scope of delivery” (page 7).

If parts are missing or damaged:

☞Please consult your dealer or customer services.

☞Remove the packaging material and the protective film.

D“8.1 Dispose of packaging” (page 32).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Berbel BEH 90 GL Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Berbel BEH 90 GL

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info