Bedienungsanleitung Berbel BIH 120 BL (Seite 24 von 36) (Englisch)

784211

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Operation

6005735_0 – 31.03.2021

4.2.2 Extraction mode / recirculated air mode

changeover

If the device is configured for hybrid mode, it is possible to

switch between extraction mode and recirculated air mode

at any time after activating the changeover function.

The changeover function is activated in configuration mode.

D“4.3 Configuring the device” (page 26).

Button Function

If the changeover function is activated:

☞Touch the button one time.

Button glows dimly:

yThe device operates in extraction mode.

yThe wall box is opened.

yThe cleaned air is discharged outdoors.

Button glows brightly:

yThe device is operating in recirculated air

mode.

yThe wall box is closed.

yThe cleaned air is discharged into the

room.

4.2.3 Filter filling indicator

The device has a check indicator in order to remind the

operator to change the filter filling. If no recirculated air filter

is used, the control indicator does not have any meaning.

The function is set so that the button flashes every 1,000 fan

operating hours (flash duration 120 seconds) as soon as

the device is turned off. The hours counter is restarted by

switching off the control indicator.

Button Function

Button flashes:

The filter filling must be replaced.

D“6.2.2 Replacing filter filling (with

recirculating and hybrid mode)”

(page 29).

☞Hold the button (> 1 second) to restart the

hours counter.

4.2.4 Window contact switch

If a window contact switch is connected to the device, this

monitors whether the corresponding window is open or

closed. Extraction only takes place with

an open window or in recirculated air mode.

Button Function

Button flashes:

yA window contact switch is connected to

the device.

yThe window is closed.

yThe device does not perform extraction.

☞Open the window.

yExtraction can be used.

4.2.5 Hob lighting

The hob lighting is dimmable and is equipped with energy-

saving LEDs. The lighting can be used independently of the

fan.

It can be switched on when the device is on. It can be

switched off at any time.

The colour temperature can be changed.

Button Function

Dimmer.

☞Press the button once to switch the hob

lighting on or off.

☞Hold the button (more than 1 second)

to start the dimmer. After releasing the

button, the hob lighting remains at the

selected brightness.

After switching off, the hob lighting starts with

full brightness the next time it is switched on.

Colour temperature.

☞Touch the button one time.

☞Touch and hold the button again within

half a second to start the colour cycle.

The hob lighting switches on, the colour cycle

starts.

☞Release the button when the desired

colour temperature is reached.

The colour cycle stops, and the selected

colour temperature is saved.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Berbel BIH 120 BL Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Berbel BIH 120 BL

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info