Bedienungsanleitung Berbel BKA 83 DLC (Seite 28 von 40) (Englisch)

784245

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Operation

6006361_a – 18.05.2022

4.4.6 Maintenance function

The device has a check indicator in order to remind the

operator to change the filter filling. If no recirculated air filter

is used, the control indicator does not have any meaning.

The control indicator blinks every 1000 fan operating hours.

The hours counter is started anew by switching off the check

indicator.

Button Function

The symbol illuminates, the filter filling must

be replaced.

D“6.2 Maintenance” (page 34).

After replacement of the filter filling:

☞Press the menu button.

☞Press the slider at the position below the

symbol for longer than 3 seconds.

yThe counter restarts.

4.4.7 Head chef function

Function for adjustment of cooking zones to a stored cooking

level. Display of the pot recognition is deactivated with this

function.

Settings with the initial start of the function:

yThe front left cooking zone starts on power level 8.

yThe rear left cooking zone starts on power level 6.

yThe rear right cooking zone starts on power level 2.

yThe front right cooking zone starts on power level 4.

If the function is used, the most recently used settings are

saved permanently. The stored settings are reactivated the

next time the function is started.

Access takes place after pressing the menu button;

the corresponding symbol is displayed.

Button Function

☞Press the slider at the position below the

symbol.

yThe four displays of the cooking zones

briefly blink the word “C-H-E-F”.

yThe cooking zones are ready for the

cooking process in the saved power levels.

To switch off the function:

☞Press the menu button.

☞Press the slider at the position below the

symbol.

4.4.8 Automatic pot recognition function

Function for automatic recognition of cookware placed on a

cooking zone. With recognition, it is possible to operate the

selected cooking zone directly via the slider.

As delivered, the function is activated.

Access takes place after pressing the menu button;

the corresponding symbol is displayed.

Button Function

☞Press the slider at the position below the

symbol.

yThe symbol illuminates dimly.

yAutomatic pot recognition is switched off.

To switch the function on again:

☞Press the slider again at the position below

the symbol.

yThe symbol illuminates brightly.

4.4.9 Volume function

Function for adjusting the volume of acoustic signals.

Access takes place after pressing the menu button;

the corresponding symbol is displayed.

Button Function

☞Press the slider at the position below the

symbol.

Adjustment of the volume on the slider:

yDirect selection by tapping the power

level.

ySwiping movement to the right in order to

increase the volume.

ySwiping movement to the left in order to

decrease the volume.

To exit the function and save the adjusted

value:

☞Press the menu button.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Berbel BKA 83 DLC Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Berbel BKA 83 DLC

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info