Bedienungsanleitung Berbel BKH 90 GL-2 (Seite 21 von 32) (Englisch)

784178

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Operation

6005049_0 – 21.11.2019

4.2.2 Extraction mode / recirculated air mode

changeover

If the device is configured for hybrid mode, it is possible to

switch between extraction mode and recirculated air mode

at any time after activating the changeover function.

The changeover function is activated in configuration mode.

D“4.3 Configuring the device” (page 23).

Button Function

If the changeover function is activated:

☞Touch the button one time.

Button glows dimly:

yThe device operates in extraction mode.

yThe wall box is opened.

yThe cleaned air is discharged outdoors.

Button glows brightly:

yThe device is operating in recirculated air

mode.

yThe wall box is closed.

yThe cleaned air is discharged into the

room.

4.2.3 Filter filling indicator

The device has a control indicator to remind the operator

to change the filter filling. If no air circulation filter is used,

the control indicator has no meaning.

The function is set so that the button flashes every 1,000 fan

operating hours (flash duration 120 seconds) as soon as

the device is turned off. The hours counter is restarted by

switching off the control indicator.

Button Function

Button flashes:

The filter filling must be replaced.

D“6.2.2 Replacing filter filling (with

recirculating and hybrid mode)”

(page 26).

☞Hold the button (> 1 second) to restart the

hours counter.

4.2.4 Window contact switch

If a window contact switch is connected to the device, this

monitors whether the corresponding window is open or

closed. Extraction only takes place with an open window or

in recirculated air mode.

Button Function

Button flashes:

yA window contact switch is connected to

the device.

yThe window is closed.

yThe device does not perform extraction.

☞Open the window.

yExtraction can be used.

4.2.5 Cooktop lighting

The cooktop lighting is dimmable and is equipped with

energy-saving LEDs. The lighting can be used independently

of the fan. It can be switched on when the device is on.

It can be switched off at any time.

The colour temperature can be changed.

Button Function

Dimmer.

☞Press the button once to switch the

cooktop lighting on or off.

☞Hold the button (more than 1 second)

to start the dimmer. After releasing the

button, the cooktop lighting remains at

the selected brightness.

After switching off, the cooktop lighting

starts with full brightness the next time it is

switched on.

Colour temperature.

☞Touch the button 1x.

☞Touch and hold the button again within

half a second to start the colour cycle.

The cooktop lighting switches on, the colour

cycle starts.

☞Release the button when the desired

colour temperature is reached.

The colour cycle stops, and the selected

colour temperature is saved.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Berbel BKH 90 GL-2 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Berbel BKH 90 GL-2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info