Bedienungsanleitung Berbel BTH 100 ML (Seite 24 von 36) (Englisch)

784225

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Operation

6005033_0 – 08.11.2019

To achieve an optimal efficiency in removing cooking fumes:

☞Turn the device on 1-2 minutes before you start cooking.

This allows the flow of air to build up, and the fumes are

removed at an early stage.

☞In order to collect the cooking fumes effectively, use the

rear hob plates for intensive cooking.

☞Avoid cross-currents (e.g. draughts) across the hob.

☞During the cooking process, switch to a power level that

is appropriate for the intensity of the cooking vapours:

yPower level 1 - lowest fan power

yPower level 2 - medium fan power

yPower level 3 - high fan power

☞If the intensity of the cooking vapours does not subside,

switch to a higher power level.

☞Switch to the POWER setting if frying.

☞Turn on the run-on function when you have finished

cooking.

D“4.3.1 Run-on function” (page 24).

☞Check the fresh air supply at regular intervals.

☞Use the device also to reduce other unpleasant smells.

Such as from:

yOnions and garlic

yOven, microwave and steamer

yFondue and raclette

DWARNING

Fire hazard due to grease residue!

In operation grease residue, which is highly inflammable,

collects in and on the device.

☞Clean the device properly.

D“5. Cleaning” (page 26).

If you switch the machine on and hear an unusually loud fan

noise:

☞Clean the device.

☞Observe the stipulations for cleaning.

D“5. Cleaning” (page 26).

If you switch the machine on and notice a smell:

☞Change the filter filling.

☞Observe the stipulations for changing the filter filling.

D“6.2.2 Replacing filter filing (with recirculating and

hybrid mode)” (page 28).

After 6 hours without operation, the device (including

lighting) automatically switches off.

4.3.1 Run-on function

The device comes with a run-on function. If this function is

used, the device will work for a further ten minutes at the last

chosen power level.

In recirculated air mode, it is necessary to use the run-on

function so that the device can remove the remaining

odours. Using the run-on function increases the life of the

filter filling. The filter filling must be replaced at regular

intervals.

The run-on function can be switched on manually or

automatically. The automatic run-on function is activated in

configuration mode.

D“4.4 Configuration” (page 25).

Touch

field

Function

The device is switched on.

If the automatic run-on function is activated:

☞Touch the touch field 1x.

The device switches off.

The run-on time starts automatically in the last

selected power level.

If the automatic run-on function is not

activated:

☞Touch the touch field 2x - within

2 seconds.

The device switches off.

The run-on time is started manually in the last

selected power level.

During the run-on time (10 minutes), the

operating symbol for the selected power level

will flash.

4.3.2 Extraction mode / recirculated air mode

changeover

If the device is configured for hybrid mode, it is possible to

switch between extraction mode and recirculated air mode

at any time after activating the changeover function.

The changeover function is activated in configuration mode.

D“4.4 Configuration” (page 25).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Berbel BTH 100 ML Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Berbel BTH 100 ML

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info