Bedienungsanleitung Bergamont 2020 - General (Seite 16 von 23) (Englisch)

779525

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

b ca e fd

| 30 31 |

ENGLISHENGLISH GENERAL MANUAL | OWNER’S MANUALOWNER’S MANUAL | GENERAL MANUAL

Realign the components, if necessary, and gently tighten the bolts to ensure a reliable

clamping of the components (b). The maximum torque values are printed directly on

the components or specified in the manuals of the component manufacturers.

For more information see the chapters “Adjusting the BERGAMONT bike to the

rider” and “Headset” in this BERGAMONT general manual as well as in your detailed

BERGAMONT owner’s manual. For additional information on your bicycle and the

web links for the component manufacturers, please visit the manual pages of the

bike brand you have purchased via your Quick Start Manual.

3. Check whether the chain still runs on the chainrings and the sprockets. If your

BERGAMONT bike fell over to the chain side, verify the proper functioning of the

gears. Ask somebody to lift your BERGAMONT bike by the saddle and carefully shift

through all the gears. Pay particular attention when switching to the small gears,

making sure the rear derailleur does not get too close to the spokes as the chain

climbs onto the larger sprockets (c+d).

If the rear derailleur or the drop-outs/derailleur hanger is bent, the rear derailleur

may collide with the spokes. This in turn can destroy the rear derailleur, the rear

wheel or the frame. Check the function of the front derailleur, as a displaced front

derailleur can throw off the chain, thus interrupting the drive of your BERGAMONT

bike. Risk of falling!

For more information see the chapter “Gears” in your detailed BERGAMONT

owner’s manual. For additional information on your bicycle and the web links for the

component manufacturers, please visit the manual pages of the bike brand you have

purchased via your Quick Start Manual.

4. Make sure the saddle is not out of alignment using the top tube (e) or the bottom

bracket shell as a reference. If necessary, open the clamping, realign the saddle

and retighten the clamping.

For more information see the chapters “Adjusting the BERGAMONT bike to the rider”

and “Using quick-releases and thru axles” in this BERGAMONT general manual as

well as in your detailed owner’s manual. For additional information on your bicycle

and the web links for the component manufacturers, please visit the manual pages of

the bike brand you have purchased via your Quick Start Manual.

5. Let your BERGAMONT bike bounce on the ground from a small height (f). If there is

any rattling, see where it comes from. Check the bearings and bolted connections, if

necessary. Tighten them slightly, if necessary.

•WARNING: Ensure that the braking surfaces and brake pads are absolutely free

of wax, grease and oil. Risk of accident!

•CAUTION: When replacing any parts, be sure to only use parts that bear

the appropriate mark and, to be on the safe side, original spare parts. For more

information see the chapter “Brakes” in this general manual. For additional information

on your bicycle and the web links for the component manufacturers, please visit the

manual pages of the bike brand you have purchased via your Quick Start Manual. Your

BERGAMONT dealer will be pleased to help you.

CAUTION: Read in any case the chapter “Brakes” in your detailed BERGAMONT

owner’s manual before you start to readjust or to service the brake or before doing

any work whatsoever. For additional information on your bicycle and the web links

for the component manufacturers, please visit the manual pages of the bike brand

you have purchased via your Quick Start Manual.

TESTS AFTER AN ACCIDENT

1. Check whether the wheels are still firmly fixed in the drop-outs (a) and whether the rims are

still centred with respect to the frame or fork. Spin the wheels and observe the gap either

between brake pads and rim sides or between frame and tyre. If you have rim brakes and

the width of the gap changes markedly and you have no way to true the rim where you are,

you need to open the brakes a little with the special device so that the rim can run between

the brake pads without touching them. Please note that in this case the brakes may not act

as powerfully as you are used to. No matter whether you have rim or disc brakes, have the

wheels trued by your BERGAMONT dealer immediately after you are back home.

For more information see the chapters “Brakes”, “Using quick-releases and thru

axles” and “Wheels and tyres” in this BERGAMONT general manual as well as in

your detailed BERGAMONT owner’s manual. For additional information on your

bicycle and the web links for the component manufacturers, please visit the manual

pages of the bike brand you have purchased via your Quick Start Manual.

2. Check that handlebars and stem are neither turned nor bent nor broken and that

they are level and upright. Check whether the stem is firmly fixed in the fork by trying

to turn the handlebars relative to the front wheel. Briefly lean on the brake levers to

make sure the handlebars are firmly fixed in the stem.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bergamont 2020 - General Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bergamont 2020 - General

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info