Bedienungsanleitung Bergamont 2020 - General (Seite 20 von 23) (Englisch)

779525

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

| 38 39 |

ENGLISHENGLISH GENERAL MANUAL | OWNER’S MANUALOWNER’S MANUAL | GENERAL MANUAL

BERGAMONT SERVICE AND MAINTENANCE SCHEDULE

It is advisable to have your BERGAMONT bike serviced regularly after the bedding-in

phase. The schedule given in the table below is a rough guide for cyclists who ride their

bike between 1,000 and 2,000 km or 50 to 100 hours of use a year.

If you consistently ride more or if you ride a great deal on poor road surfaces, the

maintenance periods of the BERGAMONT service plan will shorten accordingly.

CAUTION: For your own safety, bring your BERGAMONT bike to your

BERGAMONT dealer for its first inspection after 100 to 300 kilometres, 5 to 15

hours of initial use or four to six weeks, and at the very latest after three months.

CAUTION: For more information see the chapter “BERGAMONT service and

maintenance schedule” in your detailed BERGAMONT owner’s manual and in

the manuals of the component manufacturers. For additional information on

your bicycle and the web links for the component manufacturers, please visit the

manual pages of the bike brand you have purchased via your Quick Start Manual.

RECOMMENDED TORQUE SETTINGS FOR YOUR BERGAMONT BIKE

All bolted connections of the bike components have to be tightened carefully and

checked regularly to ensure the safe and reliable operation of the BERGAMONT bike.

This is best done with a torque wrench

that disengages as soon as the desired torque

value has been reached or a click-type torque wrench. Tighten carefully by approaching

the prescribed maximum torque value in small steps (0.5 Nm increments) and check

in between the proper fit of the component. Never exceed the maximum torque value

indicated by the manufacturer!

CAUTION: Where no maximum torque setting is given start with 2 Nm. Observe the

indicated values and observe the values on the components and/or in the manuals

of the component manufacturers. For additional information on your bicycle and the

web links for the component manufacturers, please visit the manual pages of the

bike brand you have purchased via your Quick Start Manual.

CAUTION: Due to the unmanageable number of components on the market,

BERGAMONT is not in a position to foresee every product that will be replaced or

newly assembled by third parties. Therefore BERGAMONT denies any liability for

such kind of additions or modifications with regard to compatibility, torque values

etc. Whoever assembles or modifies the BERGAMONT bike shall ensure that the bike

was assembled according to the state-of-the-art in science and technology.

CAUTION: Some components have the maximum permissible torque values printed

on them. Use a torque wrench and never exceed the maximum torque value! If you

are in doubt or if you have any questions, contact your BERGAMONT dealer.

WARRANTY

Bike limited warranty

What is covered?

This warranty covers defects in materials and workmanship at the time of transfer

of risks in frames, swingarms and forks (provided it is a fork of BERGAMONT) on

BERGAMONT branded bikes sold completely assembled by BERGAMONT or an

authorized BERGAMONT dealer (“Product”).

How long does coverage last?

This voluntary manufacturer’s warranty is limited to five years for frames and

swingarms, respectively two years for forks, from the date of purchase of the Product

and is limited to the first purchaser of the Product. Transfer of the Product from the first

purchaser to another person terminates this limited warranty.

The limited warranty of five years for the frames and swingarms shall only be granted in

case once a year a maintenance service has been effected according to maintenance

requirements as set forth in the manual. The effected annual maintenance service shall

be confirmed by stamp and signature. In case such an annual maintenance service

has not been effected the warranty of five years for the frame shall be reduced to three

years. Costs for maintenance and service have to be borne by the owner of the Product.

The Warranty period for category 5.1 and 5.2 bicycles is limited to 2 years.

Repaired or replaced Products are covered for the remainder of the original warranty

period and subject to the conditions outlined in the original warranty, to the extent

permitted by law.

Hereby BERGAMONT grants a worldwide voluntarily manufacturer’s warranty. To

the extent permitted by law and unless a shorter duration is stipulated by law, any

warranties implied by law are limited in duration to maximum five, respectively two

years, from the date of purchase of the Product and are limited to the first purchaser of

the Product.

What will BERGAMONT do in the event of a guarantee case?

BERGAMONT will replace the defective product with a product of a quality or nature

and similar level, will repair or refund the purchase price (after presentation of the

proof of purchase of the product), in its sole discretion. Non-defective components

are replaced at your expense. In such a case, we will contact you before replacing the

non-defective part for your agreement.

What does this limited warranty not cover?

This limited warranty does not cover defects which did not exist before the transfer of

risks. This limited warranty does not cover Products used in rental operations. This

limited warranty does not cover purchases of not completely assembled bikes. This

limited warranty does not cover any defect caused by “wear and tear” (a complete

list of all parts of “wear and tear” can be found in the manual), accident, neglect,

Bergamont 2020 - General Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bergamont 2020 - General

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info