Bedienungsanleitung Bergamont CITY - 2019 (Seite 17 von 79) (Englisch)

779517

Zoom out

Zoom in

Vorherige Seite

1/79

Nächste Seite

ENGLISHENGLISH TREKKING AND TREKKING‑PEDELEC | ORIGINAL OPERATING INSTRUCTIONSORIGINAL OPERATING INSTRUCTIONS | TREKKING AND TREKKING‑PEDELEC

b ca e fd

DANGER!

Do not touch the brake disc directly after having stopped, e.g. after a long down-hill

ride, you may burn your fingers! Always let the brake disc cool down before

opening the quick-release.

Safe fastening of a component with a quick-release

Open the quick-release. You should now be able to read “Open“ (b) on the lever.

Make sure the component to be fastened is in the accurate position.

For more information see the chapters “Adjusting the BERGAMONT bike to the rider”

and “Wheels and tyres” and the manuals of the component manufacturers.

Move the lever back, as if to close it. Now you should be able to read ”Close“ on

the outside of the lever. When you start closing the lever you should feel virtually no

resistance with your hand until the lever is at a right angle to the frame/fork (c).

When continuing to close the lever the resistance you feel should increase significantly

and towards the end even more strength is required to close the lever. Use the ball of your

thumb while your ﬁngers pull on an immovable part, such as the fork (d) or a rear stay, but

not on a brake disc or spoke, to push it in all the way.

In its end position, the lever should be at a right angle to the quick-release axle (e),

i.e. it should not stand out. The lever should lie close to the frame or the fork so that it

cannot be opened accidentally. Make sure, however, that the lever is easy to handle

for actual quick use.

To check whether the lever is securely locked apply pressure to the end of the hand

lever and try to turn it while it is closed (f). If you can turn the lever around, open it and

increase the preload. Screw the tightening nut on the opposite side clockwise by half

a turn. Close the quick-release lever and check it again for tightness.

Finally lift the bike a few centimetres, so that the wheel no longer touches the ground

and hit the tyre from above. If it is properly fastened, the wheel will remain ﬁrmly fixed

in the drop-outs of the frame or fork without producing any rattling.

If your seat post is equipped with a quick-release mechanism, check whether the

saddle is firmly fixed by trying to twist it relative to the frame (a, p. 34).

4. Is the battery tight in its holder and the lock properly locked up? Never set off with

a loose and unlocked battery.

For more information see the system instructions of your drive manufacturer.

5. Are the tyres in good condition and do they have sufficient pressure? Note that

a pedelec weighs more and that your usual tyre pressure may be insufficient. A

higher pressure gives a better riding stability and reduces the risk of a puncture.

The minimum and maximum pressure (in bar or PSI) is indicated on the tyre side.

For more information see the chapter “Wheels and tyres”.

DANGER!

Do not use your BERGAMONT pedelec, if it fails at one of these points! A defective

BERGAMONT pedelec can lead to serious accidents! If you are in doubt or if you

have any questions, contact your BERGAMONT dealer.

USING QUICK‑RELEASES

Most BERGAMONT bikes are fitted with quick-releases to ensure fast adjustments,

assembly and disassembly. Be sure to check whether all quick-releases are tight

before you set off on your BERGAMONT bike. Quick-releases should be handled with

greatest care, as they affect your safety directly.

Practise the proper use of quick-releases to avoid any accidents.

Quick-release retention mechanisms essentially consist of two operative elements (a):

1. The hand lever on one side of the hub which creates a clamping force via a cam

when you close it.

2. The tightening nut on the other side of the hub with which the preload on the

threaded rod (quick-release axle) is set.

| 32 3 3 |

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bergamont CITY - 2019 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bergamont CITY - 2019

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info