Bedienungsanleitung Bergamont Pedelec 2016 (Seite 53 von 87) (Englisch)

779501

Zoom out

Zoom in

Vorherige Seite

1/87

Nächste Seite

104 105

MTB-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2016 ORIGINAL OPERATING INSTRUCTIONS 2016 | MTB-PEDELEC

psi bar psi bar

10 0.7 40 2.8

15 1.0 45 3.1

20 1.4 50 3.4

25 1.7 55 3.8

30 2.1 60 4.1

35 2.4 65 4.5

b ca e fd

ENGLISH

Rims of clincher and folding tyres require in general a high-value rim tape over

the complete width of the rim base. In the case of rim brakes, the rim tape pro-

tects the inner tube from the braking heat which could make the tyre burst.

DANGER!

Replace tyres with a worn tread or with brittle or frayed sides. Dampness

and dirt penetrating the tyre can cause damage to its inner structure. The

tube might burst. Risk of falling!

DANGER!

If you mount a new tyre with another size than the standard tyre mounted,

it might be possible that the clearance between the front of your shoe and

the wheel will be reduced when you ride at reduced speed. Also observe the

space between fork and frame. Risk of accident!

DANGER!

Treat your tyres with care. Always ride your bike with the prescribed tyre

pressure (f) and check the pressure at regular intervals, at least once a

week. Riding with too low or too high air pressure may make the tyre come off

the rim or burst.

DANGER!

Clincher and folding tyres allowing an inflation pressure of five bars or more

have to be mounted on hook bead rims, identifiable by the designation “C”.

DANGER!

Observe the maximum pressure value of the rim. The pressure is depend-

ent on the tyre width. You can find the values in the manuals of the rim or

wheel manufacturer on this BERGAMONT info CD.

DANGER!

Please note that a pedelec weighs more and that your usual tyre pressure

may be insufficient. A higher pressure gives a better riding stability and

reduces the risk of a puncture. The minimum and maximum pressure (in bar or

psi) is indicated on the tyre side.

NOTES ON TYRES, INNER TUBES, RIM TAPE, INFLATION PRESSURE

The tyres should provide grip and traction. At the same time they should run

smooth and enhance the rider’s comfort by absorbing small shocks. Both the

rolling friction and the grip depend on the nature of the tyre carcass, the rubber

compound and the tyre tread. Your BERGAMONT dealer will be pleased to help

you choose from the numerous types of tyres (a).

If you want to mount a new tyre, you need to observe the sizing system and

the actual size of the old tyre. The latter is specified in two different units on the

side of the tyre. One of the sizes is the standardised size in millimetres which is

more precise, e.g. the number sequence 57-622 (b) means that the tyre is 57

mm wide when fully inflated and has an inner tyre diameter of 622 millimetres.

The other size is indicated in inches (e.g. 29x2.25”).

Tyres must be inflated to the proper inflation pressure (c) to provide an optimal

compromise between smooth running and riding comfort. Properly inflated

tyres are also more resistant to punctures. An insufficiently inflated tyre can

easily get pinched (“snakebite”) when it goes over a sharp kerb.

The air pressure recommended by the manufacturer is given on the side of the

tyre or on the type label (d). The lower of the two pressure specifications makes

for better cushioning for lightweight riders and is therefore best for cycling on

a rough surface. Rolling resistance on level ground decreases with growing

pressure, but so does comfort. Highly inflated tyres are therefore most suitable

for heavy riders and for riding on tarred roads. Therefore, adjust the pressure to

your weight and your riding habits.

Inflation pressure is often given in the old system of units, i.e. in psi (pounds per

square inch). The table gives the most common pressure values in terms of both

systems (e).

Clincher and folding tyres and rim alone are not able to hold the air. Therefore,

an inner tube has to be placed inside the tyre to retain the air pressure.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bergamont Pedelec 2016 Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info