779526
19
Zoom out
Zoom in
Vorherige Seite
1/63
Nächste Seite
ENGLISH ENGLISH
ROAD BIKE | OWNER’S MANUALOWNER’S MANUAL | ROAD BIKE
b ca e fd
| 36 3 7 |
DANGER!
G
The setting range of the saddle is very small. Replacing the stem allows you to
make far bigger adjustments to the riders fore-to-aft position, as stems come in
different lengths. In doing so you may achieve differences of more than ten centimetres.
In this case you usually would have to adjust the length of the cables – a job best left to
your BERGAMONT dealer!
NOTE!
I
The manufacturers of saddles deliver their products with detailed manuals. Read
them carefully before adjusting the position of your saddle. If you are in doubt or if
you have any questions, contact your BERGAMONT dealer.
Adjustment of saddle position and tilt
With patent seat posts (d) one or two bolts fix the clamping mechanism, which
controls the tilt and the horizontal position of the saddle. Some seat posts have two
bolts side-by-side.
Release the bolt(s) at the top of the seat post. Release the bolt(s) two to three turns
anticlockwise at the most, otherwise the whole assembly can come apart. Move the
saddle forth or back, as desired. You may have to give the saddle a light blow to make
it move.
Please observe the markings on the saddle rail. Make sure the seat of the saddle
remains horizontal (e) as you retighten the bolt(s). Your BERGAMONT bike should
stand on level ground while you adjust the saddle.
Having found your preferred position, make sure both clamp halves fit snugly around
the saddle rails before tightening the bolt(s) to the correct torque value as prescribed
by the seat post manufacturer.
Retighten the bolt(s) with a torque wrench according to the manuals of the manufac-
turer. After fastening the saddle, check whether it resists tilting by bringing your
weight to bear on it once with your hands at either end of the saddle (f).
DANGER!
G
Modifications in the area of the carbon forks are jobs which should be left to
a skilled two-wheel/bicycle mechanic. BERGAMONT therefore recommends
that you ask your BERGAMONT dealer to do any work on the carbon fork, whenever
necessary. Wrong processing and unfavourable stems may lead to breakage. Risk
of accident!
DANGER!
G
Sawdust from cutting carbon components has a reputation of causing cancer.
Therefore, do not blow or sweep the dust off, but remove it with a moist rag.
Dispose of it immediately.
SADDLE ADJUSTMENT – FORE-TO-AFT POSITION AND HORIZONTAL TILT
The inclination of your upper body (a), and hence your riding comfort and pedalling
power, are also influenced by the distance between the grips of the handlebars and
the saddle. This distance can be altered slightly by changing the position of the
saddle rails in the seat post clamp. However, this also influences your pedalling.
Whether the saddle is positioned more to the front or to the back of the bike will alter
how rearward the pedalling position of your legs is.
Make sure the saddle is clamped within the range of the marking on the saddle rail,
i.e. on the straight part of the rail, never in the curved sections.
You need to have the saddle horizontal in order to pedal in a relaxed manner. If it is
tilted, you will constantly have to lean against the handlebars to prevent yourself from
slipping off the saddle.
DANGER!
G
The bolted connections of the seat post have to be tightened to the prescribed
torque values (b). Use a torque wrench and never exceed the maximum torque
values! You will find the prescribed values in the chapter “Recommended torque
settings for your BERGAMONT bike”, directly on the components and/or in the manuals
of the component manufacturers.
DANGER!
G
Make sure the saddle is clamped within the range of the marking on the saddle
rail and not in the curved section of the saddle rails (c). Otherwise the saddle
rail can fail! Check the bolts by using a torque wrench once a month according to the
prescribed values.
19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

bergamont-road-bike-2019

Suche zurücksetzen

  • Hallo,
    wie stelle ich bei meinem E Bike Bergamont 500 8 Gang Nabenschaltung Baujahr 2019 die Fahrrad Kette richtig ein Eingereicht am 6-10-2023 19:46

    Antworten Frage melden
  • Hallo,
    wie stelle ich ich bei meinem E Bike Bergamont 500 8 Gang Nabenschaltung meine Fahrradkette ein Eingereicht am 6-10-2023 19:43

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bergamont ROAD BIKE 2019 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Bergamont ROAD BIKE 2019

Bergamont ROAD BIKE 2019 Bedienungsanleitung - Deutsch - 65 seiten

Bergamont ROAD BIKE 2019 Bedienungsanleitung - Französisch - 64 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info