489141
81
Zoom out
Zoom in
Vorherige Seite
1/194
Nächste Seite
80
Buttonholes
Automatic with direct legth entry
Buttonhole foot No. 3A
Programming the buttonhole length
Buttonholes can be sewn to a specific length with the buttonhole foot No. 3A.
Buttonhole length = cutting length in mm.
select the desired buttonhole
touch «i»-icon
touch «Direct entry length»-icon
Determining buttonhole length
enter the buttonhole length using the multifunction knobs (stitch width or
stitch length knob)
the length entered appears on the left of the button
the number on the right of the button is the exact button size
touch «Back»-icon
the length entered is saved
the programmed length is displayed on the left
Back to the buttonhole menu
touch «Back»-icon
the Buttonhole Display appears
Buttonhole foot No. 3A
Determining button size
The sewing computer calculates the length of the buttonhole directly from the
diameter of the button. 2mm are automatically entered for the button thickness.
hold the button on the bright field in the lower right corner of the Display
adjust the bright field to the button size using the stitch width or stitch length
knob
the button size is displayed in mm on the right of the button between the
arrows (e.g. 14mm)
remove the button from the Display
touch «Back»-icon
the length entered is saved
the programmed length is shown on the left side of the Display
Corrections for thick buttons
Match buttonhole length to buttonhole thickness (raised buttons, etc.) e.g.
buttonhole length + 1cm (incl. 2mm) if button height is 1cm.
The button slides easily through the buttonhole.
Automatic with button measuring
Back to buttonhole begin
touch «Pattern begin»-icon
the sewing computer sets the program to the start of the buttonhole again
Deleting saved buttonholes
press the «clr» button or touch «recording»
«auto» goes off and «REC» appears
a new buttonhole length can be programmed
033527.53.04_2014-07_Manual_B580_EN
81

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

bernina-580

Suche zurücksetzen

  • Zeichen für unterfaden schaltet nicht aus (Spule) Eingereicht am 2-4-2020 16:36

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bernina 580 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Bernina 580

Bernina 580 Bedienungsanleitung - Deutsch - 194 seiten

Bernina 580 Bedienungsanleitung - Holländisch - 190 seiten

Bernina 580 Bedienungsanleitung - Französisch - 194 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info