614590
119
Zoom out
Zoom in
Vorherige Seite
1/131
Nächste Seite
Attachment
120
Malfunction Cause Repair
Upper thread breaks Incorrect needle/thread
combination.
> Match the needle with the thread size.
Upper thread is too tight.
> Reduce the upper thread tension.
Incorrectly threaded.
> Rethread.
Poor quality thread.
> Use quality thread.
The stitch plate or the hook tip is
damaged.
> Contact your BERNINA specialized dealer to eleminate
the damages.
> Change the stitch plate.
The thread is caught in the area
of the thread take-up lever.
1
> Remove the screw (1) at the cover with the Torx Allen
wrench.
> Pull the cover carefully to the front.
> Flip the cover slightly upwards to remove it.
> Remove the thread remnants.
> Attach the cover and tighten the screw.
Lower thread breaks The bobbin case is damaged.
> Replace the bobbin case.
The stitch hole in the stitch plate
is damaged.
> Contact your BERNINA specialized dealer to eleminate
the damage.
> Change the stitch plate.
Needle blunt or bent.
> Change the needle.
Needle breaks The needle is incorrectly inserted.
> Insert the needle with the flat side to the back as far it
will go and tighten the screw.
The fabric has been pulled.
> Feed the fabric evenly.
Thick fabric has been pushed.
> Use the appropriate presser foot, i. e. the Jeans foot No.
8, for thick material.
> Use the height compensation tool for thick seams.
Knotted thread.
> Use quality thread.
Display is inactive Incorrect calibrating data.
> Switch the machine off.
> Switch the machine on and at the same time push the
button «Needle left/right» and keep pressed.
> Calibrate the display again.
The eco-function is active.
> Touch the icon «eco».
Stitch width not adjustable The selected needle and stitch
plate cannot be used in
combination.
> Change the needle.
> Change the stitch plate.
036044.50.04_2014-09_Manual_740_EN
119

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bernina 740 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Bernina 740

Bernina 740 Bedienungsanleitung - Deutsch - 135 seiten

Bernina 740 Bedienungsanleitung - Französisch - 133 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info