114 Preparing for Embroidery
Embroidery Presser Foot No. 26
• attach the Embroidery presser foot
No. 26
• raise the presser foot so that the
embroidery hoop can be attached
Needles for Embroidery
• depending on the embroidery thread use
needle size 75 to 90
• use special embroidery or Metafil needle
for embroidery or metallic thread
• use an undamaged needle
• raise the needle so that the embroidery
hoop can be attached
Straight Stitch Plate (optional accessory)
• the straight stitch plate has a small needle
hole. The needle insertion points (upper
and lower thread stitching) are limited,
which produces a better embroidery result
•remove the standard stitch plate and
replace it with the straight stitch plate
Threading the Upper Thread
• attach foam pad and place the upper
thread spool
• when using Rayon or slippery embroidery
threads, slip the net over the upper thread
spool
• this prevents the upper thread from
slipping and gives an even thread feed
Threading the Bobbin Thread
• for embroidery, insert the thread into the
finger of the bobbin
Lower the Feed Dog
•press the button on the right side of the
sewing computer to lower the feed dog
Preparing the Embroidery Computer for Embroidery
Threading Upper and Bobbin Thread
17
18
20
10
13
Spool pin
When using metallic or
specialty threads, using the
vertical spool pin and the
supplementary thread guide
(optional accessory) may also
help avoid problems.
While embroidering the bobbin
can also be wound, just like in
sewing.
