Bedienungsanleitung Bernina Aurora 450 (Seite 75 von 86) (Englisch)

453300

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

EC on PC - Functions

Functions on the display

Show grid

1. a large cursor - a blue cross - indicates

the hoop center. In addition to the blue

cross, there is a green cross for the

centre of Mega-Hoop position 1 and a

red cross for the centre of Mega-Hoop

position 3

2. the grid is now visible, the motif can be

positioned better

3. the grid and the cursor are switched off

Zoom (4 levels)

• display of the motif will be enlarged by

one level with each mouse click

• the fifth click will bring you back to the

starting position

• user defined viewing:

• place the cursor on the visible arrows

without clicking

• the embroidery motif is moved

horizontally or vertically

• press the ctrl button simultaneously to

move the motif faster

Position hoop

1. the hoop will be moved until the needle

is exactly in the center of the motif

2. the hoop will be moved until the needle

is exactly in the center of the hoop, a

blue point will appear in the middle of

the icon

3. the hoop will be moved until the needle

is exactly on the beginning of the

selected color

• this procedure can also be done with

«F2» on the computer keyboard

Positioning of motif within the hoop

• this option is available when the positio-

ning mode is active

• place the cursor on the motif (within the

blue hoop)

• the cursor becomes a small hand

• left-click and drag the motif to the

desired position

• release mouse button and drop the motif

in place

• if the motif is positioned outside the

embroidery area the color of the frame

changes from blue to red

• for better positioning activate the grid if

required

Note:

If the Start-/Stop button is clicked on when

a motif is highlighted with a red frame, the

embroidery process will not start because

the motif can not be embroidered in the

selected position. Move the embroidery

motif first until the frame changes from red

to blue.

Accurate positioning of motif in the

hoop

• click on the icon with the cursor and the

positioning mode will be activated

• it can also be activated with «F4» on the

computer keyboard

• by clicking on the directional arrow(s)

move the motif within the embroidery

hoop to the desired position in small

steps

• with the four arrows on the keyboard the

motif can be positioned exactly

• the embroidery motif moves by 0.2mm

each time the key is pressed

• if the «Ctrl» key is pressed as well, the

motif moves by 2mm

Single/Multi color motif

• if the icon is inactive, the colors will be

embroidered individually, which is

standard

• if the icon is active, the complete motif

will be embroidered in one color without

stopping

• the embroidery motif and the color

information will be displayed in one color

shows that the icon has

several functions. These can

be activated by clicking on

them again.

032907.52.04_1103_a430_a440_a450_EN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bernina Aurora 450 Seite 75

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bernina Aurora 450

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info