Bedienungsanleitung Bertazzoni F60CONXD (Seite 15 von 36) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

605202

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

ENGLISH

Programming the Cooking Stop Time

1 Press on the clock sensor several times

until the symbol lights up.

2 Select the cooking stop time by pressing

the or sensors.

3 Two consecutive beeps will then sound and

the display will show the remaining cooking

time. The symbol will flash slowly to

indicate that the oven will switch itself

automatically.

4 Select a cooking function and temperature.

5 Once it is the set time, the oven will turn

off, an alarm will sound and the symbol

will flash more quickly.

6 Press on any sensor on the control panel to

stop the alarm.

You can change the programmed cooking stop

time at any moment by pressing on the clock

sensor until the symbol flashes and

then by pressing on the or sensors.

The two beeps you hear after that will confirm

the new time has been set.

You can use this function even if you are

already cooking with the oven. If this is the

case, follow all of the above instructions

except No. 4.

Programming Cooking Time and Cooking

Stop Time

11 Press on the clock sensor ). The symbol

will light up.

12 Select the cooking time by pressing the

or sensors.

13 Two consecutive beeps will then sound,

and the display will show the remaining

cooking time. The

) symbol will flash

slowly.

14 Press on the clock sensor several

times until the symbol lights up.

15 Select the cooking stop time by pressing

the or sensors.

16 This will be confirmed by two beeps. The

current time will show on the display and

the

) symbol will remain lit.

17 Select a cooking function and temperature.

18 The oven will remain off, with the

symbol lit and the symbol flashing

slowly. The clock will show the current time

and the inside light will remain off. The

oven is now programmed.

19 When it is time to start cooking, the oven

will switch on and will operate for the

programmed cooking time. The clock

display will show the remaining cooking

time.

10 Once the set time is reached, the oven will

turn off, an alarm will sound and the

and symbols will flash.

11 Press on any sensor on the control panel

to stop the alarm.

If you wish to change the cooking stop time

while cooking is in progress, press on the

clock sensor until the symbol flashes.

You can then change the cooking stop time by

pressing on the or sensors. The two

beeps you hear after that will confirm the new

time has been set.

Child Safety Function

This function locks the oven, preventing small

children from playing with it. To turn on the

function, press on the symbol until you

hear a long beep and see several flashing

dots between the digits of the temperature

display. The oven is now locked.

To turn off the child lock, keep the symbol

pressed until a long beep sounds.

Caution

In the event of power failure, your electronic

clock timer settings will be erased and 12:00

will flash on the clock display. Reset the clock

and programme again.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bertazzoni F60CONXD Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info