Bedienungsanleitung Bertazzoni HER120 6G MFE DNET (Seite 21 von 40) (Englisch)

605225

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

the two knobs, no effect will result on oven operation except only for lamp or fan

when switched on. Electric oven is heated by two resistances: one upper resistance

and one circular resistance; by turning the switch knob (Fig.26A-26B) the resistance

referred to the symbol printed on the knob ring will be switched on but in order to put

it in operation the thermostat knob has to be turned until the orange light on will

confirm that resistance is in operation. By turning the switch knob on one of the 5

operation mode the lamp will be switched on simultaneously with the related

resistance. Once the temperature and the type of resistance are selected, the

operation of the resistance will be controlled by the thermostat. It is therefore

accepted that during operation the orange light will switch on and off.

To turn off the electric oven set the switch knob to position 0 to prevent the

thermostat from controlling the elements. Setting the thermostat knob to position 0

turns off the elements but it is still possible, using the switch, to turn on the electric

fan and the oven light.

The switch has 5 different fixed positions corresponding to 5 different types of oven

operation:

- the symbol indicates that only the oven light is turned on;

- the symbol indicates that the circular element (3000W) and the electric

fan have been turned on;

- the symbol indicates that the grill element (2500W) and the electric fan

have been turned on;

- the symbol indicates that only the grill element (2500W) has been turned

- the symbol indicates that only the electric fan has been turned on.

When the knob is set to one of these five positions, the oven light is always on, thus

indicating that the oven is being energised.

When 5+0 switch is combined with gas thermostat, resistances are switched off;

only lamps and cooling fan operates. It is possible to use the oven convection fan by

selecting on switch knob one of the following modes:

For operating the oven on Dual Energy ranges, see paragraph for use of gas oven.

Once the gas oven use is finished, switch off all the oven functions by turning the

gas thermostat knob and 5+0 switch knob to position 0 (zero).

Fig 26A Fig 26B

Using the electric oven Before using the ovens for the first time:

- Remove all packaging and accessories from inside the ovens.

- Heat the ovens to 200°C for

½ hour to burn off

manufacturing residues.

- The automatic programmer must be set to Manual mode for ordinary cooking.

- The oven will not function when set in Automatic mode. See page 26.

To use the ovens:

Turn the function selector knob (Fig.27A-27B and Fig.28A-28B) clockwise to the

desired function.

The orange light will illuminate, indicating that the element is on.

Turn the temperature selector knob (Fig.29A-29B and Fig.30 for PRO T version

only)

clockwise to the desired temperature. The orange light will go out once the

oven has reached temperature and is ready for use. It is normal for this light to go

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bertazzoni HER120 6G MFE DNET Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bertazzoni HER120 6G MFE DNET

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info