Bedienungsanleitung Bertazzoni HER90 6 MFE SNET (Seite 14 von 40) (Englisch)

605228

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

INDUCTION

60x60 model 90x60 or 100x60 model

Fig 17A Fig 17B

Functions

: Keep Warm 42°C

: Keep Warm 70°C

1…9 : Power Level

P : Booster

A : Heating Accelerator

Hob control knob These knobs provide control of the ceramic hob's cooking zones.

The zone it controls is shown above each knob. Turn the knob to the right to set the

zone's operating power; the settings range from a minimum of 1 to a maximum of 9.

The working power is shown by a display on the hob.

Heating accelerator Each cooking zone is equipped with a heating accelerator.

This system allows the zone to be operated at peak power for a time proportional to

the heating power selected.

To start the heating accelerator, turn the knob to the left, select setting "A" and then

release. The letter "A" will appear on the display on the hob.

You now have 3 seconds to select the heating setting of your choice. Once a setting

between 1 and 9 has been selected, "A" and the chosen setting will flash in

alternation on the display. '

While the heating accelerator is in operation, the heating level can be increased at

any time. The "full power" time will be modified accordingly. If the power is reduced

by turning the knob anticlockwise, option "A" is automatically deactivated.

Power Function The power function allows the user to operate each heating zone continuously at the

maximum power for a time of no more than 10 minutes. This function can be used,

for example, to bring a large amount of water to the boil in a hurry, or to turn up the

heat under meat.

Turn the knob clockwise and set heating level 9, then use the knob to set the "P"

position and release il. "P" appears on the corresponding zone display.

After 10 minutes, the power is reduced automatically, the knob returns to the 9

setting and the "P" disappears.

However, the power function can be turned ott at any time by reducing the heating

level. .

When the power function is selected for one heating zone (e.g. the left front zone),

the power absorbed by the second zone (Ieft rear zone) might be reduced to supply

the maximum available energy to the first zone.

Consequently, the power function takes priority over the heating accelerator.

If a pan is removed from the cooking zone while the power function is on, the

function is switched off.

Holding Function The holding function keeps the temperature of the bottoms of pans at about 42°C or

(60x60 model only)

70°C . This allows foods to be kept hot with optimal energy consumption and to be

heated gently. The holding function can be kept in operation for up to 2 hours.

The holding function is and is indicated by the relevant symbols on the cooking

zones.

Bridge Function

This function allows to use the 2 cooking zones at the right at same time with the

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bertazzoni HER90 6 MFE SNET Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bertazzoni HER90 6 MFE SNET

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info