Bedienungsanleitung Bertazzoni Heritage H486GMFE MT (Seite 32 von 40) (Englisch)

612650

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

When the oven is turned off, the temperature on the thermometer will slowly drop

until it reaches room temperature.

Note: The Thermostat Position and Oven Temperature correspondence in table no.

6 is indicative and depends on various factors such as the type of gas and supply

pressure.

Follow the thermometer temperature for cooking.

Note: it is normal to record different temperatures from those indicated on the panel

thermometer, when you measure the temperature in the middle of the oven using a

different thermometer.

The temperature indicated by the thermometer is the mean temperature inside the

oven and does not indicate the temperature of any single point.

Fig 31

CLEANING YOUR COOKER

A false reading of the temperature may be caused by heavy food soiling, residual oven cleaner on the

thermostat and/or the roof elements, or a dislodged thermostat phial. Cleaning should be carried out

regularly and with care. Always disconnect the electricity supply to the appliance before any cleaning takes

place. Never allow fat or oil to build up on any surface, particularly on oven bases and oven trays, as this can

lead to permanent staining or the risk of fat fires.

Cleaning your gas hob Stainless steel hob

- Do not use any abrasive cleaners on the stainless steel hotplate.

- Wipe with a soft cloth using warm water and washing-up liquid. Whilst still damp

polish dry with an microfibre cloth.

- For stubborn cooked-on stains use a non-abrasive stainless steel cleaner.

- Always work in the same direction as the grain of the stainless

steel,

rinse well

and polish dry.

Pan supports

Pan supports and burner caps are made from cast iron with a protective coating of

acid resistant enamel, and must not be put in a dishwasher.

- Always allow pan supports and burner caps to cool completely before immersing

in water.

- Wipe with a soft cloth using warm water and washing-up liquid.

- Far stubborn marks use a cream cleaner applied with a nylon scourer. Rinse

well and dry, before replacing on the hotplate.

- When placing the pan supports on the hotplate, the widest edge of the cast iron

faces to the outside left or right.

Burner rings

- Use a cream cleaner and a nylon scourer. Rinse well and dry.

- After cleaning, ensure that the burner slots are dry and not blocked.

Alloy burner bases

- Never put the alloy bases in a dishwasher as the salt may damage the alloy.

- Always ensure that no other metals are in the same water as the alloy bases as

electrolysis may occur, blackening the alloy. Wipe clean with a soft cloth, warm

water and washing-up liquid.

- For stubborn marks use a cream cleaner on a soft damp cloth.

- Rinse and dry before replacing on the hotplate.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bertazzoni Heritage H486GMFE MT Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bertazzoni Heritage H486GMFE MT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info