Bedienungsanleitung Bertazzoni PM361I0X (Seite 14 von 32) (Englisch, Holländisch)

605248

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

CLEANING THE APPLIANCE:

Never use abrasive cleaners

Before cleaning the appliance it should be disconnected from the power supply.

Cleaning the work surface: periodically clean the burner heads, the enamelled steel pan supports and the

burner caps using warm water.

Any spillage must always be removed as soon as possible using a rag.

If it become difficult to open or close a valve, do not force it, but immediately request the assistance

of the technical service personnel.

Cleaning the enamelled parts: Enamelled parts should be cleaned frequently with soapy water. Never use

abrasive powder. Do not leave acidic or alkaline substances on the enamelled parts (such as vinegar, lemon

juice, salt, tomato sauce, etc.) and do not wash the enamelled parts while they are still hot.

Cleaning the stainless steel parts: Clean the parts with soapy water and dry them with a soft cloth. The

shine is maintained by periodically using suitable products which can be found in the supermarket. Never

use abrasive powders.

Cleaning the burner caps: Lift the burner caps from the burner heads and wash them in soapy water and

dry thoroughly. Before replacement on the burner head ensure that the holes are not clogged.

Cleaning the glass ceramic: Warning: Do not use any kind of cleaner on the glass while the surface is hot,

use only the razor blade scraper. The resulting fumes can be hazardous to your health. Heating the cleaner

can chemically attack and damage the surface.

Clean the surface when it is completely cool with the following exception: remove dry sugar, sugar syrup,

tomato products and milk immediately with the razor blade scraper.

Wipe off spatters with a clean, damp sponge or a paper towel. Rinse and dry. Use white vinegar if smudge

remains; rinse.

Apply a small amount of the glass ceramic cooktop cleaner. When dry, buff surface with a clean paper towel

or cloth.

TYPE OF STAIN

WHAT TO DO

ACCESSORIES or AGENTS

EMPLOYED

Minor

Soak the area to be cleaned with soapy

water, then wipe it.

Cleaning sponges & mild

detergents

Accumulated burnt-on

stains

Soak the area to be cleaned with warm

soapy water. Use a special scraper for

vitroceramic glass to remove grease and

food particles. Finish off with a cleaning

sponge, then wipe it clean.

Cleaning sponges, mild

detergents and cleaning agents

for vitroceramic glass

Rings and traces of lime

scale

Apply warm white vinegar on the stain. Let

it sit, then wipe off with a soft cloth.

Use a commercial cleaner on affected

area. Note that such cleaner may leave

stains on stainless steel frame, thus

protect exposed stainless steel.

Cleaning cloth, white vinegar, or

diluted descaling agent.

Burnt-on stains following

sugar spillage, melted

aluminum or plastic.

- Apply special vitroceramic glass cleaner

on the surface, preferably one which

contains silicone (protective action).let it

sit, then finish off with a cleaning sponge,

then wipe it clean.

Vitroceramic cleaning agents and

sponge.

Allowable: Non-abrasive Paste - Ordinary Sponge or Special Sponge for Delicate Items

Not allowable: Abrasive-backed sponge - Powder

Troubleshooting

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bertazzoni PM361I0X Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info