Bedienungsanleitung BeSafe iZi Flex fix i-size (Seite 3 von 101) (Alle Sprachen)

768214

Zoom out

Zoom in

Vorherige Seite

1/101

Nächste Seite

10 11

• Adjustable headrest

• Shoulderbelt lock

• Shoulderbelt guide

• Lapbelt guider

• Reclining handles (2x)

• Base

• ISOﬁx release handle

• SIP bumper

• Height adjustment handles (2x)

• ISOﬁx connectors (2x)

• ISOﬁx release buttons (2x)

• ISOﬁx indicators (2x)

• ISOﬁx vehicle anchorage (2x)

• PAD+

(1a)

(1b)

(1c)

(1d)

(1e)

(1f)

(1g)

(1h)

(1i)

(1j)

(1k)

(1l)

(1m)

(1n)

Preparing to install

Installation

1. When installing the seat in the front vehicle seat make sure the

backrest of the vehicle seat is in an upright position.

2. Position the seat inside the vehicle.

3. Pull the ISOﬁx release handle to release the ISOﬁx connectors. A

button on top of the handle will keep the handle in the released

position and locks the ISOﬁx connectors to slide in the base again.

(2) The ISOﬁx arms lock only in the position where it is totally

extended. In this locked position 2 red marks next to the button on

the handle will become visible. (3)

4. Click the ISOﬁx connectors to the ISOﬁx anchorage points in the

vehicle seat (4). Make sure that all ISOﬁx indicators are GREEN. (5, 6)

5. Press the button on top of the ISOﬁx release handle (located

between the red marks) down and push the handle back into the

base. (7, 8) Push the seat as far as possible towards the backrest of

the vehicle seat. (9)

6. Make sure the back of the seat is touching the backrest of the vehicle

seat. If the headrest of the vehicle is pushing the seat away from the

backrest, adjust the headrest.

7. If the seat cannot be used in combination with ISOﬁx anchorage

points in the vehicle seat, the ISOﬁx connectors can be stowed inside

the seat and the seat can be used in combination with the 3-point

belt only.

8. Slide the shoulderbelt in the shoulderbelt guide. (10) Make sure the

belt is not twisted and that the shoulderbelt guide is closed again to

keep the belt inside. (11)

9. The seat is delivered with removable SIP+ (side impact protection

+). This extra side impact protection should be used on the door

side of the vehicle. It can be connected on the outside of the side

bumper in 2 slots. The seat already oers high level integrated side

impact protection. This extra side impact protection improves the

protection in a side impact still further. (12)

10. Do not use the SIP+ on the seat when the space between seat and

door of the vehicle is too small, which might lead to a situation

where the seat is not positioned correctly on the vehicle seat.

1. Adjust the headrest to the correct height by turning the height

adjuster handle. (13) Make sure that the shoulder belt is level with

your child’s shoulder. (14)

2. The seat can be positioned in 2 positions by pulling the reclining

handle upwards and pushing the seat forwards or backwards. Position

the seat in the correct position before positioning the child with the

vehicle belt. (15)

3. Position the vehicle belt in front of the child and lock the belt into the

buckle of the vehicle. (16, 17)

4. BeSafe recommends to use the lapbelt guider to keep the child

seated in the optimum upright position. To use the lapbelt guider

position the lapbelt through the lapbelt guider.

5. The PAD+ must be used around the shoulder vehicle belt and

positioned between the chin and the chest of the child.

6. Remove slack in the belt by pulling the belt towards the retractor. (18)

Positioning of the child

Removing the seat

1. Remove the shoulderbelt out of the shoulderbelt guide by pushing

the shoulderbelt lock in the guider up and slide the belt out. (19, 20)

2. Pull the ISOﬁx release handle to release the ISOﬁx connectors. (21)

In this way the base of the seat can move forwards and the ISOﬁx

release buttons can be operated. (22)

3. Release both ISOﬁx connectors, by pushing down the release

buttons. (23) Slide the arms with ISOﬁx connectors inside the seat

before you remove the seat from the vehicle. To be able to slide

the arms with ISOﬁx connectors inside the seat, press the button

(between the red marks) on top of the ISOﬁx release handle down.

4. Remove the seat from the vehicle.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BeSafe iZi Flex fix i-size Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info