Bedienungsanleitung BeSafe iZi Flex S fix (Seite 3 von 101) (Alle Sprachen)

768215

Zoom out

Zoom in

Vorherige Seite

1/101

Nächste Seite

10 11

• Adjustable headrest

• Shoulderbelt lock

• Shoulderbelt guider

• Backrest

• Base

• ISOﬁx release handle

• SIP bumper

• Height adjustment handles (2x)

• ISOﬁx connectors (2x)

• ISOﬁx release buttons (2x)

• ISOﬁx indicators (2x)

• ISOﬁx vehicle anchorage (2x)

(1a)

(1b)

(1c)

(1d)

(1e)

(1f)

(1g)

(1h)

(1i)

(1j)

(1k)

(1l)

Preparing to install

Installation

1. When installing the seat in the front vehicle seat make sure the

backrest of the vehicle seat is in an upright position.

2. Position the seat inside the vehicle.

3. Pull the ISOﬁx release handle to release the ISOﬁx connectors. A

button on top of the handle will keep the handle in the released

position and locks the ISOﬁx connectors from sliding back into the

base again. The ISOﬁx arms lock only in the position where they are

extended completely. In this locked position 2 red marks next to the

button on the handle will become visible. (2, 3)

4. Click the ISOﬁx connectors onto the ISOﬁx anchorage points in the

vehicle seat. Make sure that all ISOﬁx indicators are GREEN. (4, 5, 6)

5. Press the button down on top of the ISOﬁx release handle (located

between the red marks) and push the handle back into the base.

Push the seat back as far as possible towards the backrest of the

vehicle seat. (7, 8, 9)

6. Make sure the back of the seat is touching the backrest of the vehicle

seat. If the headrest of the vehicle is pushing the seat away from the

backrest, adjust the headrest. (9)

7. If the seat cannot be used in combination with ISOﬁx anchorage

points in the vehicle seat, the ISOﬁx connectors can be stowed inside

the seat and the seat can be used in combination with the 3-point

belt only.

8. Slide the shoulderbelt into the shoulderbelt guide. Make sure the belt

is not twisted and that the shoulderbelt guide is closed again to keep

the belt inside. (10, 11)

1. Adjust the headrest to the correct height by turning the height adjuster

handle. Make sure that the shoulder belt is level with your child’s

shoulder. (12, 13)

2. Position the vehicle belt in front of the child and lock the belt into the

buckle of the vehicle. (14, 15)

3. Remove slack in the belt by pulling the belt towards the retractor. (16)

Positioning of the child

1. Remove the shoulderbelt out of the shoulderbelt guide by pushing the

shoulderbelt lock in the guider up and slide the belt out. (17, 18)

2. Pull the ISOﬁx release handle to release the ISOﬁx connectors. In this

way the base of the seat can move forwards and the ISOﬁx release

buttons can be operated. (19, 20)

3. Release both ISOﬁx connectors, by pushing down the release buttons.

(21) Slide the arms with ISOﬁx connectors inside the seat before you

remove the seat from the vehicle. To be able to slide the arms with

ISOﬁx connectors inside the seat, press the button down (between the

red marks) on top of the ISOﬁx release handle. (22, 23)

4. Remove the seat from the vehicle.

Removing the seat

Installation of 3 car seats

1. The SIP bumper on the inner side of the vehicle can be removed from

the seat to create more space next to the seat for an additional car

seat in the middle position of the vehicle. Remove a side bumper only

on the inner side of the vehicle and never on the door side. (24, 25)

2. To remove a SIP bumper, push the button and move the bumper

sideways and to the back, to hook it out of the fabric hooks. Keep the

SIP bumper for later usage. (26, 27)

3. To install a SIP bumper, ﬁrst hook in the lower hook, then hook in the

upper hook and ﬁnally secure the bumper in the middle by pushing

the button ﬁrst and releasing it when it is positioned against the seat.

Check if the SIP bumper is connected correctly. Use the SIP bumper

only on the door side of the vehicle. (28, 29, 30)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BeSafe iZi Flex S fix Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info