Bedienungsanleitung BeSafe iZi Modular i-Size (Seite 3 von 98) (Alle Sprachen)

652127

Zoom out

Zoom in

Vorherige Seite

1/98

Nächste Seite

10 11

•Adjustable head rest (1a)

•Shoulder straps (2x) (1b)

•Side support (1c)

•Harness buckle (1d)

•Seat cushion (1e)

•Central adjuster (1f)

•Reclining handle (1g)

•Release handle head rest (1h)

•Front brace (1i)

Preparing to install

Installation of the seat on the i-Size base

1. Check if the ISOﬁx and ﬂoor support indicators on the base are

green. (2)

2. Make sure that the front brace is installed on the base. The

operation of the front brace is described in the user manual for the

base. (2)

3. Make sure that the seat is always in the release position when you

want to install the seat on the base or take the seat o the base.

The two yellow arrows on the seat and the base must be aligned.

(3) Use the reclining handle to adjust the recline position, see

step 6.

4. Position the seat in the correct position on the base untill it clicks

with the base and the indicator at the front shows green. (3)

5. When the seat is positioned rearfacing on the back seat of the

vehicle, you should, if possible, push the front seat of the vehicle

backwards, so that it is in contact with the child seat (4). If it is not

possible to obtain contact with the child seat, push the back rest of

the front seat of the vehicle forward as far as possible.

6. The seat can be taken o and turned around by pulling the seat

release handle at the front of the base (5,6). Make sure that the

two yellow arrows on seat and seatbase are aligned; this is the only

position where you can take o the seat.

7. The seat should only be turned around to forward facing when the

child is minimum 88 cm or 15 months. BeSafe recommends to use

the seat rearfacing for as long as possible.

8. When the seat is positioned forward facing, the front brace has to

be in position 1. (7)

9. The seat cannot be turned around in the BeSafe iZi Modular RF.

This seat is only to be used rearfacing.

Positioning of the child

Removal of the seat of the i-Size base

1. Check that the shoulder strap slots are level with your child’s

shoulders. (12)

2. Pull the shoulder straps up while pressing the button of the central

adjuster. (13)

3. Open the harness buckle. (14)

4. The height of the shoulder straps and the head rest can be adjusted

by pulling the release handle upwards at the back of the head rest

and pulling the head rest up or down. (15)

5. Position the shoulder straps over the marking at the sides of the seat

to use the magnets to keep the harness open while you position the

child. (16)

6. When the child is positioned, place the shoulder straps over the

child’s shoulders and close the buckle: CLICK! (17)

7. Pull the harness strap through the central adjuster in the direction of

the arrow straight up/forwards. Continue pulling until the harness is

a comfortable but a ﬁrm ﬁt. (18)

1. The seat can be taken o by pulling the seat release handle at the

front of the base. Make sure that the two yellow arrows on seatbase

and seatbase are aligned; this is the only position where you can take

o the seat.

10. The seat can be reclined by pulling the reclining handle at the front

side of the seat. (8)

11. In a rearfacing position the seat should only be used in the 2 most

reclined positions. (9)

12. The leg room of the seat, in rearfacing position, can be made larger

by pulling the front brace box out from the base. The front brace box

has 3 positions. To adjust the front brace position, the seat has to be

taken o and the base should be released from the ISOﬁx. (10)

13. The seat is delivered with removable SIP+ (side impact protection +).

This extra side impact protection should be used on the doorside of

the vehicle. It can be connected by slotting between the seatshell and

the fabric. The seat already oers high level integrated side impact

protection. This extra side impact protection improves the protection

in the side impact still further. (Not on all models) (11)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BeSafe iZi Modular i-Size Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info