Bedienungsanleitung BeSafe iZi Turn i-size (Seite 3 von 103) (Alle Sprachen)

768213

Zoom out

Zoom in

Vorherige Seite

1/103

Nächste Seite

10 11

• Adjustable headrest

• Shoulder straps

• Seat cushion

• Harness buckle

• Side support

• Central adjuster

• Reclining handle

• Release handle headrest

• Spirit level

• Floor support

• Floor support height indicator

• Height adjuster ﬂoor support

• Rotation release handle

• Switch for ISOﬁx connectors (2x)

• ISOﬁx connectors (2x)

• ISOﬁx release switch

• ISOﬁx indicators (2x)

• ISOﬁx car anchorage (2x)

(1a)

(1b)

(1c)

(1d)

(1e)

(1f)

(1g)

(1h)

(1i)

(1j)

(1k)

(1l)

(1m)

(1n)

(1o)

(1p)

(1q)

(1r)

Preparing to install

Installation

1. When installing in the back seat of the vehicle, push the front seat of

the vehicle forward as far as possible and adjust the back rest into

an upright position (if it can be adjusted).

2. When installing in the front seat of the vehicle, adjust the back rest

into an upright position.

3. Position the vehicle on a horizontal surface when installing the seat.

4. When the base is lifted the ﬂoor support should fall downwards from

underneath the base. Do this outside the car.

5. Push down the switch for the ISOﬁx connectors at both sides to

release the ISOﬁx connectors. (2)

6. Position the base on the vehicle seat. Click the ISOﬁx connectors on

to the ISOﬁx anchorages on the vehicle seat. Make sure that both

ISOﬁx indicators are green. (3)

7. Push the seat towards the backrest of the vehicle seat until it

touches the backrest. (4)

8. The ISOﬁx connectors willhave resistance sliding in, in the most

outward positions, before they are connected with the ISOﬁx

anchorage of the vehicle.

9. Tip: once the ISOﬁx connectors are installed, the seat can be

turned towards the door of the vehicle to get a better view on the

installation display.

10. Remove the yellow cap from the ﬂoor support. Adjust the ﬂoor

support, so it is in contact with the ﬂoor of the vehicle. (5)

11. The height indicator of the ﬂoor support shows green when the ﬂoor

support is in contact with the ﬂoor. (5)

12. Lift the base at the front side (near the spirit level) and extend

the ﬂoor support till the spirit level is in the middle, indicating a

horizontal position of the base. (5)

13. Tip: place one foot onto the bottom end of the ﬂoor support while

lifting the base to make adjusting the length at this step easier.

14. The alarm sound stops when the ﬂoor support indicators show green

and it is in contact with the ﬂoor and when the horizontal spirit level

shows a horizontal position of the seat. (5)

15. When having the child seat installed rear facing in the back, it is

recommended to position the front vehicle seat in a way that it is

close to the touchpoint with the child seat. Make sure that the child

seat can still rotate freely.

When having the child seat installed rear facing on the passenger

seat in the front, it is recommended to position the passenger seat

in a way that the dashboard is close to the touchpoint with the child

seat. Make sure that the child seat can still rotate freely.

16. The seat is delivered with removable SIP+ (side impact protection

+). This extra side impact protection should be used on the door side

of the vehicle. It can be connected by slotting between the seat shell

and the fabric. The seat already oers high level integrated side

impact protection. This extra side impact protection improves the

protection in the side impact still further. (Not on all models) (6)

17. Tip: For an optimal height of the SIP+, position it between the two

raised dots on the side of the seat shell.

18. Do not use the SIP+ on the seat when the space between seat and

door of the vehicle is too small, which might lead to a situation where

the seat is not positioned correctly on the vehicle seat. (6)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BeSafe iZi Turn i-size Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info