Bedienungsanleitung BeSafe Pregnant iZi fix (Seite 2 von 52) (Alle Sprachen)

768219

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

6 7

! Vital information

• DO NOT switch o the airbag or any other safety system of the

particulair vehicle seat where the BeSafe Pregnant is used.

• Use the BeSafe Pregnant only in combination with a 3-point

car belt.

• Use the BeSafe Pregnant from 2 months of pregnancy.

• After an accident, the BeSafe Pregnant must be replaced. Although

it may look undamaged, the BeSafe Pregnant may not be able to

protect mother and unborn child as well as it should in another

accident.

• Before every use, make sure that the 3-point belt is not damaged or

twisted and installed tight.

• DO NOT attempt to dismantle, modify or add any part to the seat.

Warranty will expire if non-original parts or accessories are used.

• KEEP this user manual for later use with the seat.

• The BeSafe Pregnant iZi FIX is for Pregnant women to help position

the lap belt of the 3-point car belt correctly.

Thank you for choosing BeSafe Pregnant iZi FIX

• Shoulder belt

• Lap belt

• Strap

• Strap buckle

• Strap ring (2x)

• FIX connectors (2x)

• Crotch strap

• Lap belt connector

• Isoﬁx car anchorage (2x)

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(9)

Preparing to install

Pregnant belt installation in seat with isoﬁx anchorages

Pregnant belt installation in seat without isoﬁx anchorages

1. In seats with isoﬁx anchorages the Besafe Pregnant can be installed

with the ﬁx connectors.

2. Remove the strap from the pregnant belt.

3. Connect both ﬁx connectors with the isoﬁx anchorages of the vehicle

seat. (10)

4. Click! (10)

1. In seats without isoﬁx anchorages BeSafe Pregnant can be installed

with the strap.

2. Put the strap around the back of the vehicle seat and close the

buckle. (11)

3. Click! (12)

4. Pull the strap through the buckle until it is tight. (13)

5. When the vehicle seats do not have isoﬁx anchorage or no possibility

to put the strap around the seat, BeSafe Pregnant can not be used in

this partculair vehicle seat position.

Using BeSafe Pregnant

Cleaning instructions

1. After installing the BeSafe Pregnant in the vehicle seat, it is ready for

use.

2. Sit on top of the pregnant belt and install the 3-point car belt in the

usual way. (14)

3. Pull the ﬂap of the lap belt connector up between your legs and

position the ﬂap behind the lap belt. (15)

4. Close the ﬂap of the lap belt connector over the lap belt by closing

both poppers. (15)

5. Make sure there is no slack in the 3-point car belt.

6. Make sure that the lap belt is positioned low across the hips.

7. Use the BeSafe Pregnant only in combination with a 3-point car belt.

1. The pregnant belt must be washed according to the instructions on

the product.

2. DO NOT use any aggressive cleaning agents; these may harm the

construction material.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BeSafe Pregnant iZi fix Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info